Before I tell you how to find your address, I will first make it clear, within the italicized text, exactly which address you are looking for, if you are not already sure:
You may also skip the text written in italics if your issue does not include an ERC20 token, if you wish.
Ledger Live can confuse some users with its interface. On LL, to manage an ERC20 token, you first must go to your Ethereum account and add the token. When you then click on the added token under "Tokens" below the graph chart for your account's ETH amount over time, the screen will then open a new screen, that looks just the same, except focused on the specific ERC20 token. To confuse users further, there is then an option to "Star account", which then add the ETH icon with the ERC20 token's first letter or symbol overlapping, onto the easy access sidebar, as if it was another account of similar independency to the ETH account it was added to.
This improperly displays the two "accounts" relation to each other.
Your ERC20 holdings (at least for any and all ERC20 that I know of) are "held" in the exact-same address as the Ethereum address it was added to, which also "holds" any Ether you've added to it. You send both Ether (ETH) and any ERC20 Tokens to and from only Ethereum addresses of equivalent capabilities, in both qualities and quantities. In all basic terms and uses, they are the same.
So, to know what the problematic account's address is, find the address of the Ethereum account it was added to in Ledger Live.
Now, to find your address on MyCrypto, the most reliable way to find it, that I am aware of, is this:
Open Ledger Live. Go to the screen of your Ethereum address (again, this is the one that you added your ERC20 token, if applicable. If you're not dealing with an ERC20 token, you may ignore everything I've put in Italics). Click on "Edit account"; this is the icon next to the star that may look like a hex-wrench tool. On the new screen-overlay, you will see "> ADVANCED LOGS". Click on the ">" and it will point down while revealing a drop-down with some data that you may or may not recognize/understand. Likely to be found indented and in the middle-ish area, you will see this line, or something hopefully similar:
The "X" will probably be the only thing that changes, and the actual data will have a number in its place; it will not be a letter. Let's now put that line to use in MyCrypto:
Take the 44'/60'/X'/0/0 , and make sure you DO NOT copy the quotation marks, or that comma at the end either.
You can do this before or after copying and/or pasting, but drop the second "/0" at the end; it was not necessary in my case, I expect that you won't need it either, and will probably just make MyCrypto see it as an invalid input.
Okay, now go back to the "Select an Address" screen-overlay in MyCrypto.
Next to "Addresses", click on the box on the right, and you should be shown a list of options to select from in a drop-down menu.
Scroll all the way down, and you should find the "Custom" option at the very bottom. Select it.
A new box will appear; probably directly to the right of the now-shortened box that now displays the "Custom" option that you just selected. This box will offer an interface for typed input. ...yep... once again, believe it or not, you should click it.
Type " m/ ", no spaces before or after.
Type in or paste the data we retrieved from ledger live.
The box should now hold this:
Again, X should be a number. In fact, that number is probably equal to the number of Ethereum (not including any ERC20 wannabe) accounts that you've made on Ledger Live before making the one we're working on right now! (1st Eth. Acc. would have: X = 0, 2nd: X = 1, 3rd: X = 2, ...)
Make sure you've included every apostrophe ( ' ), and solidus ( / ); there is NO APOSTROPHE for the "m" at the start and the "/0" at the end!
If you press the enter key or click on the check-mark to the right of where you typed, the appropriate addresses will be generated, and the address you created through Ledger Live should be the first one on the list!
Select your address and press "Unlock", and you are now accessing your account through the MyCrypto app's interface!
In order to access your ERC20 token, you will need to add them first.
You may have to scroll down, but on the right-side of your unlocked account screen, you'll see a box with "Token Balances" as its header.
Click "Scan for tokens". This may take a short bit of time, and when it's done it may or may not display your ERC20 token. If it worked, you can head on back to the main part.
If you got the result I did, it won't display your token, or, if our result was exactly the same, it won't display any at all. However, you should now have the "Add Custom Token" option available, so see where that takes you.
You should discover four boxes, specified in order (Address/ Decimals / Token_Symbol / Balance). You may only need to fill in the "Address" box, but if you need to fill others, you'll find those with the token's address; here's 2 ways to find it, if you don't already know.
Since you've probably already been managing your token with Ledger Live, you can go to the LL screen of your "account" for that token; Right next to the account's icon, and directly above the name, you'll see:
Yes, go on; click it. You'll find the token's page on Etherscan; this was just a shortcut to the same place that both of the two previously referenced methods lead to. Skip to method... III?
Go to Etherscan.com, or a similar Ethereum-blockchain-monitoring website, if you have a different preference. Search for the name of your token, and you should be able to see it as a search result. Activate your search manually of by selecting search option. Continue on with Method III.
Method III (I&II; what makes you think there was a third method? I said 2!):
At this point, you should find the "contract address" somewhere on the screen. This is the identity of the creature that breathes life into the token, allowing it to exist within the world of Ethereum. Steal it, and tell MyCrypto that you've left some of "your" tokens in the address of your ledger's Ethereum account. MyCrypto will trust and believe you without any concern or doubt, just by putting "your" contract address in the box for "Address"; it's almost too easy!
Well whaddya know, this one isn't actually too long! Don't tell anyone who may have taken a little longer whilst finding out how to do it themselves, though. There's value in trying to do something on your own, at least at first, so I'll let them think they made the right choice (¬‿¬). But take this star for humbling yourself enough to seek further help when you need it, since that is a very important life skill as well!
Now, back to the useful stuff at the top...
﷽submitted by aibnsamin1 to Bitcoin [link] [comments]
The Federal Reserve and the United States government are pumping extreme amounts of money into the economy, already totaling over $484 billion. They are doing so because it already had a goal to inflate the United States Dollar (USD) so that the market can continue to all-time highs. It has always had this goal. They do not care how much inflation goes up by now as we are going into a depression with the potential to totally crash the US economy forever. They believe the only way to save the market from going to zero or negative values is to inflate it so much that it cannot possibly crash that low. Even if the market does not dip that low, inflation serves the interest of powerful people.
The impending crash of the stock market has ramifications for Bitcoin, as, though there is no direct ongoing-correlation between the two, major movements in traditional markets will necessarily affect Bitcoin. According to the Blockchain Center’s Cryptocurrency Correlation Tool, Bitcoin is not correlated with the stock market. However, when major market movements occur, they send ripples throughout the financial ecosystem which necessary affect even ordinarily uncorrelated assets.
Therefore, Bitcoin will reach X price on X date after crashing to a price of X by X date.
Stock Market CrashThe Federal Reserve has caused some serious consternation with their release of ridiculous amounts of money in an attempt to buoy the economy. At face value, it does not seem to have any rationale or logic behind it other than keeping the economy afloat long enough for individuals to profit financially and politically. However, there is an underlying basis to what is going on which is important to understand in order to profit financially.
All markets are functionally price probing systems. They constantly undergo a price-discovery process. In a fiat system, money is an illusory and a fundamentally synthetic instrument with no intrinsic value – similar to Bitcoin. The primary difference between Bitcoin is the underlying technology which provides a slew of benefits that fiat does not. Fiat, however, has an advantage in being able to have the support of powerful nation-states which can use their might to insure the currency’s prosperity.
Traditional stock markets are composed of indices (pl. of index). Indices are non-trading market instruments which are essentially summaries of business values which comprise them. They are continuously recalculated throughout a trading day, and sometimes reflected through tradable instruments such as Exchange Traded Funds or Futures. Indices are weighted by market capitalizations of various businesses.
Price theory essentially states that when a market fails to take out a new low in a given range, it will have an objective to take out the high. When a market fails to take out a new high, it has an objective to make a new low. This is why price-time charts go up and down, as it does this on a second-by-second, minute-by-minute, day-by-day, and even century-by-century basis. Therefore, market indices will always return to some type of bull market as, once a true low is formed, the market will have a price objective to take out a new high outside of its’ given range – which is an all-time high. Instruments can only functionally fall to zero, whereas they can grow infinitely.
So, why inflate the economy so much?
Deflation is disastrous for central banks and markets as it raises the possibility of producing an overall price objective of zero or negative values. Therefore, under a fractional reserve system with a fiat currency managed by a central bank – the goal of the central bank is to depreciate the currency. The dollar is manipulated constantly with the intention of depreciating its’ value.
Central banks have a goal of continued inflated fiat values. They tend to ordinarily contain it at less than ten percent (10%) per annum in order for the psyche of the general populace to slowly adjust price increases. As such, the markets are divorced from any other logic. Economic policy is the maintenance of human egos, not catering to fundamental analysis. Gross Domestic Product (GDP) growth is well-known not to be a measure of actual growth or output. It is a measure of increase in dollars processed. Banks seek to produce raising numbers which make society feel like it is growing economically, making people optimistic. To do so, the currency is inflated, though inflation itself does not actually increase growth. When society is optimistic, it spends and engages in business – resulting in actual growth. It also encourages people to take on credit and debts, creating more fictional fiat.
Inflation is necessary for markets to continue to reach new heights, generating positive emotional responses from the populace, encouraging spending, encouraging debt intake, further inflating the currency, and increasing the sale of government bonds. The fiat system only survives by generating more imaginary money on a regular basis.
Bitcoin investors may profit from this by realizing that stock investors as a whole always stand to profit from the market so long as it is managed by a central bank and does not collapse entirely. If those elements are filled, it has an unending price objective to raise to new heights. It also allows us to realize that this response indicates that the higher-ups believe that the economy could crash in entirety, and it may be wise for investors to have multiple well-thought-out exit strategies.
Economic Analysis of BitcoinThe reason why the Fed is so aggressively inflating the economy is due to fears that it will collapse forever or never rebound. As such, coupled with a global depression, a huge demand will appear for a reserve currency which is fundamentally different than the previous system. Bitcoin, though a currency or asset, is also a market. It also undergoes a constant price-probing process. Unlike traditional markets, Bitcoin has the exact opposite goal. Bitcoin seeks to appreciate in value and not depreciate. This has a quite different affect in that Bitcoin could potentially become worthless and have a price objective of zero.
Bitcoin was created in 2008 by a now famous mysterious figure known as Satoshi Nakamoto and its’ open source code was released in 2009. It was the first decentralized cryptocurrency to utilize a novel protocol known as the blockchain. Up to one megabyte of data may be sent with each transaction. It is decentralized, anonymous, transparent, easy to set-up, and provides myriad other benefits. Bitcoin is not backed up by anything other than its’ own technology.
Bitcoin is can never be expected to collapse as a framework, even were it to become worthless. The stock market has the potential to collapse in entirety, whereas, as long as the internet exists, Bitcoin will be a functional system with a self-authenticating framework. That capacity to persist regardless of the actual price of Bitcoin and the deflationary nature of Bitcoin means that it has something which fiat does not – inherent value.
Bitcoin is based on a distributed database known as the “blockchain.” Blockchains are essentially decentralized virtual ledger books, replete with pages known as “blocks.” Each page in a ledger is composed of paragraph entries, which are the actual transactions in the block.
Blockchains store information in the form of numerical transactions, which are just numbers. We can consider these numbers digital assets, such as Bitcoin. The data in a blockchain is immutable and recorded only by consensus-based algorithms. Bitcoin is cryptographic and all transactions are direct, without intermediary, peer-to-peer.
Bitcoin does not require trust in a central bank. It requires trust on the technology behind it, which is open-source and may be evaluated by anyone at any time. Furthermore, it is impossible to manipulate as doing so would require all of the nodes in the network to be hacked at once – unlike the stock market which is manipulated by the government and “Market Makers”. Bitcoin is also private in that, though the ledge is openly distributed, it is encrypted. Bitcoin’s blockchain has one of the greatest redundancy and information disaster recovery systems ever developed.
Bitcoin has a distributed governance model in that it is controlled by its’ users. There is no need to trust a payment processor or bank, or even to pay fees to such entities. There are also no third-party fees for transaction processing. As the ledge is immutable and transparent it is never possible to change it – the data on the blockchain is permanent. The system is not easily susceptible to attacks as it is widely distributed. Furthermore, as users of Bitcoin have their private keys assigned to their transactions, they are virtually impossible to fake. No lengthy verification, reconciliation, nor clearing process exists with Bitcoin.
Bitcoin is based on a proof-of-work algorithm. Every transaction on the network has an associated mathetical “puzzle”. Computers known as miners compete to solve the complex cryptographic hash algorithm that comprises that puzzle. The solution is proof that the miner engaged in sufficient work. The puzzle is known as a nonce, a number used only once. There is only one major nonce at a time and it issues 12.5 Bitcoin. Once it is solved, the fact that the nonce has been solved is made public.
A block is mined on average of once every ten minutes. However, the blockchain checks every 2,016,000 minutes (approximately four years) if 201,600 blocks were mined. If it was faster, it increases difficulty by half, thereby deflating Bitcoin. If it was slower, it decreases, thereby inflating Bitcoin. It will continue to do this until zero Bitcoin are issued, projected at the year 2140. On the twelfth of May, 2020, the blockchain will halve the amount of Bitcoin issued when each nonce is guessed. When Bitcoin was first created, fifty were issued per block as a reward to miners. 6.25 BTC will be issued from that point on once each nonce is solved.
Unlike fiat, Bitcoin is a deflationary currency. As BTC becomes scarcer, demand for it will increase, also raising the price. In this, BTC is similar to gold. It is predictable in its’ output, unlike the USD, as it is based on a programmed supply. We can predict BTC’s deflation and inflation almost exactly, if not exactly. Only 21 million BTC will ever be produced, unless the entire network concedes to change the protocol – which is highly unlikely.
Some of the drawbacks to BTC include congestion. At peak congestion, it may take an entire day to process a Bitcoin transaction as only three to five transactions may be processed per second. Receiving priority on a payment may cost up to the equivalent of twenty dollars ($20). Bitcoin mining consumes enough energy in one day to power a single-family home for an entire week.
Trading or Investing?The fundamental divide in trading revolves around the question of market structure. Many feel that the market operates totally randomly and its’ behavior cannot be predicted. For the purposes of this article, we will assume that the market has a structure, but that that structure is not perfect. That market structure naturally generates chart patterns as the market records prices in time. In order to determine when the stock market will crash, causing a major decline in BTC price, we will analyze an instrument, an exchange traded fund, which represents an index, as opposed to a particular stock. The price patterns of the various stocks in an index are effectively smoothed out. In doing so, a more technical picture arises. Perhaps the most popular of these is the SPDR S&P Standard and Poor 500 Exchange Traded Fund ($SPY).
In trading, little to no concern is given about value of underlying asset. We are concerned primarily about liquidity and trading ranges, which are the amount of value fluctuating on a short-term basis, as measured by volatility-implied trading ranges. Fundamental analysis plays a role, however markets often do not react to real-world factors in a logical fashion. Therefore, fundamental analysis is more appropriate for long-term investing.
The fundamental derivatives of a chart are time (x-axis) and price (y-axis). The primary technical indicator is price, as everything else is lagging in the past. Price represents current asking price and incorrectly implementing positions based on price is one of the biggest trading errors.
Markets and currencies ordinarily have noise, their tendency to back-and-fill, which must be filtered out for true pattern recognition. That noise does have a utility, however, in allowing traders second chances to enter favorable positions at slightly less favorable entry points. When you have any market with enough liquidity for historical data to record a pattern, then a structure can be divined. The market probes prices as part of an ongoing price-discovery process. Market technicians must sometimes look outside of the technical realm and use visual inspection to ascertain the relevance of certain patterns, using a qualitative eye that recognizes the underlying quantitative nature
Markets and instruments rise slower than they correct, however they rise much more than they fall. In the same vein, instruments can only fall to having no worth, whereas they could theoretically grow infinitely and have continued to grow over time. Money in a fiat system is illusory. It is a fundamentally synthetic instrument which has no intrinsic value. Hence, the recent seemingly illogical fluctuations in the market.
According to trade theory, the unending purpose of a market or instrument is to create and break price ranges according to the laws of supply and demand. We must determine when to trade based on each market inflection point as defined in price and in time as opposed to abandoning the trend (as the contrarian trading in this sub often does). Time and Price symmetry must be used to be in accordance with the trend. When coupled with a favorable risk to reward ratio, the ability to stay in the market for most of the defined time period, and adherence to risk management rules; the trader has a solid methodology for achieving considerable gains.
We will engage in a longer term market-oriented analysis to avoid any time-focused pressure. The Bitcoin market is open twenty-four-hours a day, so trading may be done when the individual is ready, without any pressing need to be constantly alert. Let alone, we can safely project months in advance with relatively high accuracy. Bitcoin is an asset which an individual can both trade and invest, however this article will be focused on trading due to the wide volatility in BTC prices over the short-term.
Technical Indicator Analysis of BitcoinTechnical indicators are often considered self-fulfilling prophecies due to mass-market psychology gravitating towards certain common numbers yielded from them. They are also often discounted when it comes to BTC. That means a trader must be especially aware of these numbers as they can prognosticate market movements. Often, they are meaningless in the larger picture of things.
Trend Definition Analysis of BitcoinTrend definition is highly powerful, cannot be understated. Knowledge of trend logic is enough to be a profitable trader, yet defining a trend is an arduous process. Multiple trends coexist across multiple time frames and across multiple market sectors. Like time structure, it makes the underlying price of the instrument irrelevant. Trend definitions cannot determine the validity of newly formed discretes. Trend becomes apparent when trades based in counter-trend inflection points continue to fail.
Downtrends are defined as an instrument making lower lows and lower highs that are recurrent, additive, qualified swing setups. Downtrends for all instruments are similar, except forex. They are fast and complete much quicker than uptrends. An average downtrend is 18 months, something which we will return to. An uptrend inception occurs when an instrument reaches a point where it fails to make a new low, then that low will be tested. After that, the instrument will either have a deep range retracement or it may take out the low slightly, resulting in a double-bottom. A swing must eventually form.
A simple way to roughly determine trend is to attempt to draw a line from three tops going upwards (uptrend) or a line from three bottoms going downwards (downtrend). It is not possible to correctly draw a downtrend line on the BTC chart, but it is possible to correctly draw an uptrend – indicating that the overall trend is downwards. The only mitigating factor is the impending stock market crash.
Time Symmetry Analysis of BitcoinTime is the movement from the past through the present into the future. It is a measurement in quantified intervals. In many ways, our perception of it is a human construct. It is more powerful than price as time may be utilized for a trade regardless of the market inflection point’s price. Were it possible to perfectly understand time, price would be totally irrelevant due to the predictive certainty time affords. Time structure is easier to learn than price, but much more difficult to apply with any accuracy. It is the hardest aspect of trading to learn, but also the most rewarding.
Humans do not have the ability to recognize every time window, however the ability to define market inflection points in terms of time is the single most powerful trading edge. Regardless, price should not be abandoned for time alone. Time structure analysis It is inherently flawed, as such the markets have a fail-safe, which is Price Structure. Even though Time is much more powerful, Price Structure should never be completely ignored. Time is the qualifier for Price and vice versa. Time can fail by tricking traders into counter-trend trading.
Time is a predestined trade quantifier, a filter to slow trades down, as it allows a trader to specifically focus on specific time windows and rest at others. It allows for quantitative measurements to reach deterministic values and is the primary qualifier for trends. Time structure should be utilized before price structure, and it is the primary trade criterion which requires support from price. We can see price structure on a chart, as areas of mathematical support or resistance, but we cannot see time structure.
Time may be used to tell us an exact point in the future where the market will inflect, after Price Theory has been fulfilled. In the present, price objectives based on price theory added to possible future times for market inflection points give us the exact time of market inflection points and price.
Time Structure is repetitions of time or inherent cycles of time, occurring in a methodical way to provide time windows which may be utilized for inflection points. They are not easily recognized and not easily defined by a price chart as measuring and observing time is very exact. Time structure is not a science, yet it does require precise measurements. Nothing is certain or definite. The critical question must be if a particular approach to time structure is currently lucrative or not.
We will measure it in intervals of 180 bars. Our goal is to determine time windows, when the market will react and when we should pay the most attention. By using time repetitions, the fact that market inflection points occurred at some point in the past and should, therefore, reoccur at some point in the future, we should obtain confidence as to when SPY will reach a market inflection point. Time repetitions are essentially the market’s memory. However, simply measuring the time between two points then trying to extrapolate into the future does not work. Measuring time is not the same as defining time repetitions. We will evaluate past sessions for market inflection points, whether discretes, qualified swings, or intra-range. Then records the times that the market has made highs or lows in a comparable time period to the future one seeks to trade in.
What follows is a time Histogram – A grouping of times which appear close together, then segregated based on that closeness. Time is aligned into combined histogram of repetitions and cycles, however cycles are irrelevant on a daily basis. If trading on an hourly basis, do not use hours.
Evaluating the yearly lows, we see that BTC tends to have its lows primarily at the beginning of every year, with a possibility of it being at the end of the year. Following the same methodology, we get the middle of the month as the likeliest day. However, evaluating the monthly lows for the past year, the beginning and end of the month are more likely for lows.
Therefore, we have two primary dates from our histogram.
1/1/21, 1/15/21, and 1/29/21
2:00am, 8:00am, 12:00pm, or 10:00pm
In fact, the high for this year was February the 14th, only thirty days off from our histogram calculations.
The 8.6-Year Armstrong-Princeton Global Economic Confidence model states that 2.15 year intervals occur between corrections, relevant highs and lows. 2.15 years from the all-time peak discrete is February 9, 2020 – a reasonably accurate depiction of the low for this year (which was on 3/12/20). (Taking only the Armstrong model into account, the next high should be Saturday, April 23, 2022). Therefore, the Armstrong model indicates that we have actually bottomed out for the year!
Bear markets cannot exist in perpetuity whereas bull markets can. Bear markets will eventually have price objectives of zero, whereas bull markets can increase to infinity. It can occur for individual market instruments, but not markets as a whole. Since bull markets are defined by low volatility, they also last longer. Once a bull market is indicated, the trader can remain in a long position until a new high is reached, then switch to shorts. The average bear market is eighteen months long, giving us a date of August 19th, 2021 for the end of this bear market – roughly speaking. They cannot be shorter than fifteen months for a central-bank controlled market, which does not apply to Bitcoin. (Otherwise, it would continue until Sunday, September 12, 2021.) However, we should expect Bitcoin to experience its’ exponential growth after the stock market re-enters a bull market.
Terry Laundy’s T-Theory implemented by measuring the time of an indicator from peak to trough, then using that to define a future time window. It is similar to an head-and-shoulders pattern in that it is the process of forming the right side from a synthetic technical indicator. If the indicator is making continued lows, then time is recalculated for defining the right side of the T. The date of the market inflection point may be a price or indicator inflection date, so it is not always exactly useful. It is better to make us aware of possible market inflection points, clustered with other data. It gives us an RSI low of May, 9th 2020.
The Bradley Cycle is coupled with volatility allows start dates for campaigns or put options as insurance in portfolios for stocks. However, it is also useful for predicting market moves instead of terminal dates for discretes. Using dates which correspond to discretes, we can see how those dates correspond with changes in VIX.
Therefore, our timeline looks like:
|Specte||Bond||Promo Cost||Hrs||Blks||Levrg / Block||Reorg Leverage||Rate||Int Cost|
submitted by everus-world to u/everus-world [link] [comments]
With cryptocurrencies entering the mainstream with a bang, more and more people every single day develop an interest in this new and strange world of blockchain. A lot of these people come to cryptos because they had heard that it’s possible to make money from them. If you’re one of those people, you’re in luck, because today I want to tell you how to mine cryptocurrency.
Understanding MiningTo put it into very simple terms, crypto mining is a process in which a machine performs certain tasks to obtain a little bit of cryptocurrency. This is the biggest TL;DR possible, so let’s branch out a bit, shall we? Imagine that you have a machine that mines crypto coins. We’ll talk about the specific types of machines later on in the tutorial, but for example’s sake, let’s just say that it’s your own, personal computer and you’re trying to figure out how to mine cryptocurrency. That is a very short and simple way of defining what is cryptocurrency mining. Now let’s move on to what you came here to see; how to mine cryptocurrency.
Cryptocurrency MiningThere are a few ways you could go about cryptocurrency mining. I’ll cover the main ones here, and start from the easiest one – cloud mining.
Method #1 – Cloud MiningIf you’re looking for crypto mining ways, cloud mining is probably the most popular way to mine cryptocurrencies without having to lift a finger. Cloud mining is a process where you pay someone (most often it’s a big corporation) a specific amount of money and “rent out” their mining machine called a “rig”, and the process of mining itself. This rent lasts for an agreed-upon period, through which all of the earnings that the rig makes (minus the electricity and maintenance costs) are transferred to your cryptocurrency wallet. The people (companies) that offer these cloud mining services usually have huge mining facilities with multiple farms (tens or hundreds of rigs stacked and operating together) at their disposal and know perfectly well how to mine cryptocurrency.
Cloud mining has become so popular mainly because it offers the possibility to participate in the world of cryptocurrencies for people who might not have enough money to buy their rigs or who perhaps simply aren’t interested in owning a rig. There are two options of cloud mining – free and paid. Naturally, a lot of people that are looking for ways to mine cryptocurrency would gravitate towards the “free” options, but it does have its drawbacks (very slow mining speeds, extra conditions, etc.). Paid cloud mining usually works like this: It is usually expected that you’ll break even at around the half-a-year – one year mark, and then profit from that point onwards. No one can know for sure, though, because the prices of cryptocurrencies are very volatile and their prices tend to sway by quite a bit.
Method #2 – CPU MiningCPU mining utilizes processors to mine cryptocurrencies. It used to be a viable option back in the day, but currently, fewer and fewer people choose this method of mining cryptocurrency daily. There are a couple of reasons why that is. First of all, CPU mining is EXTREMELY slow. You could go on for months without noticing the smallest amount of revenue. It’s also usually not worth it – you make very little amounts of money, but you probably spend ten times that amount on electricity and cooling. The problem mitigates itself by a bit if you can find a place that has nice cooling and cheap electricity bills, but that’s rarely the case.
So why do people still even use CPU mining, then?
Well, basically because anyone with a desktop computer could do it. All you need to be able to mine using the CPU method is just a computer and a couple of programs. It is possible to do it with a laptop, but it is VERY STRONGLY NOT ADVISED. Your laptop will probably fry and overheat in a matter of a couple of hours. The fact that it’s so easy to start cryptocurrency mining attracts new CPU miners every day. Some people that are looking for how to mine cryptocurrency don’t care about the details – they just want to start the process as soon as possible, and in any way possible.
Method #3 – GPU MiningGPU mining is probably the most popular and well-known method of mining cryptocurrencies. If you google “cryptocurrency mining”, GPU rigs are going to be some of the first things that you’ll see.
Cloud miners, for example, use GPU rigs for their services. And these guys are professionals that sometimes have hundreds if not thousands of rigs, so they probably know what they’re doing, right?
GPU mining is very popular because it’s both efficient and relatively cheap. Don’t get me wrong, the construction of the rig itself tends to be costly – but when it comes to its hash speed and the general workforce, the GPU mining rig is great. GPU rigs utilize graphics cards to mine cryptocurrencies. One standard rig is made out of a processor, a motherboard, cooling, rig frame and – of course – a few (2 – 8) graphics cards.A typical price for a well-performing and nicely built GPU mining rig aims to be around the $3000 price range. It is a hefty investment but will pay off much faster than, let’s say, a CPU miner. People looking for ways to mine cryptocurrency should check them out.
Method #4 – ASIC MiningASICs (Application-Specific Integrated Circuits) are special devices that are designed explicitly to perform a single task, which in this case is crypto mining. ASICs are very well known and treasured because they produce insane amounts of cryptocurrency when compared to its competitors’ GPU and CPU. But if they are so good, why didn’t I mention them sooner?
Well, mostly because they’re a big subject of controversy. You see, when the ASIC company announced its new version of the machine, the announcement caused an uproar in the cryptocurrency community. Many people have called for an outright ban on these machines.
Why? Because ASICS are so powerful, they rob other miners who are using GPU or CPU rigs of the possibility to keep up both in hash speeds and in earnings. Also, ASICS have twisted the economy of certain specific cryptocurrencies – imagine if the majority of earnings would go to one miner with an ASIC farm, what kind of chaos that would ensue.
The Best Method to Mine CryptocurrencyNow that you have an understanding of how to mine cryptocurrency and about all of the different ways to do it, which one is the best way?
The method that suits you the most depends solemnly on a few key details: are you willing to spend some initial money? If so, how much? Do you want to OWN a rig? Do you even want to do it with a rig?
Which Cryptocurrency to Mine?Your choice of gear should also depend on the type of cryptocurrency mining that you’ve decided to do. Some of the obvious favorites would be Bitcoin, Ethereum or Dash. Keep in mind, though, that Bitcoin mining is probably the trickiest of them all – since the coin is so popular, there are many miners around the world tuning into the few pools that there are and trying to snatch at least a small bit of Bitcoin. This might result in you waiting for countless hours until the first drops of Bitcoin start coming in.
Keeping that in mind, your best bet would probably be to stick with Ethereum or some other less-popular cryptocurrency. Depending on your method of choice, check out the prices, calculate when your return on investment would happen, do some math and you’ll figure it out in no time!
ConclusionAs you’ve probably noticed, there are many different ways on how to mine cryptocurrency. These are simply the main methods – if you’d like, you could even forget about mining and jump into Bitcoin faucets – but that’s a whole different story for a whole different day. But it’s an option!
One thing that you should not only remember, but also do right away is to create a cryptocurrency wallet. Decide on the type of cryptocurrency that you want to mine and simply look up the wallet options for that currency. You’ll have no problems finding one for coins like Bitcoin, Ethereum or Litecoin, but if you want to mine the less-known currencies, then you might need to search for a bit until you find a reputable wallet.
Getting a secure and reputable wallet is the most important task when you’re starting with cryptocurrency mining. Imagine if you’d be mining for a year and all of your savings would be stolen only because you didn’t pay enough attention while choosing the wallet and picked a fishy one that got hacked into.
If you’re serious and are looking for ways on how to mine cryptocurrency, I would suggest buying a hardware wallet – they are the safest and most trustworthy cryptocurrency wallets out there.
Well, this is the end of my tutorial on crypto mining. We’ve covered a few different topics and explored the different varieties of cryptocurrency mining methods. Remember – the method that suits you the most will depend solemnly on what you want and what kind of resources you have, so choose carefully! If you do decide on giving mining a chance, I wish you the best of luck!
Bitcoin.com: 29 PH/s ViaBTC: 216 PH/s ----------------------------------------- TOTAL BITCOIN CASH HASHRATE: 245 PH/s TOTAL BITCOIN NETWORK HASHRATE: 6414 PH/s (around time of fork) BITCOIN CASH PERCENTAGE: 3.9 %These figures were drawn from:
ASICs are coming to the Ethereum mining industry, and small independent miners are virtually doomed. 2Ether has come up with a solution — the third element in our dynamic block reward system. But before we explain it, we’ll have to talk about Ethereum ASICs.submitted by 2Ether to u/2Ether [link] [comments]
If you don’t know that much about Ethereum, you might be surprised to learn that ASICs for mining ETH actually exist. Isn’t Ethereum’s algorithm — Ethash — supposed to be ASIC-resistant? If it isn’t then why is everyone still mining using GPUs?
Well, Ethash is indeed much less ASIC-friendly than the algorithm of Bitcoin. It doesn’t mean that you can’t make ASIC chips for mining ether, though. It’s just that it’s difficult to make ASICs that would be much more efficient than graphic cards (GPUs).
The efficiency of a piece of mining hardware is calculated as a ratio of power (measured in kilowatt hours) to hash power (measured in megahash per second). So for example, if you have two devices that both produce 50 MH/s, but one of them consumes 1 kWh, and the other consumes 2 kWh, then the first device is twice more efficient.
ASICs cost a lot of money to design, and their market price is high. So it only makes sense to buy an ASIC if it gives you a serious advantage over other types of hardware. You should also keep in mind that if the algorithm changes, you’ll need to replace your ASIC with a new model. Such chips are built to carry out one task and one task only — that’s why they are called application-specific integrated circuits (that’s how the acronym is deciphered).
Now, the first ASICs for Ethereum came out in April 2018, and they were more than a curious gadget than a serious rival to GPUs. Vitalik Buterin said that they were not a threat and the best action would be no action.
But the situation changed. Soon, there were ASICs twice as efficient as the best graphic cards. Still, it wasn’t enough to justify the price difference.
Finally, in late September 2019, Chinese manufacturer and distributor of mining hardware Canaan announced that it would start selling a new ASIC that is 5 to 7 times more efficient than the leading GPU models. Its W/MHs ratio is just 0.68–7.5 times better compared to AMD Vega 64 and 5.3 times better than AMD RX570.
What does this mean for Ethereum mining? When such models go on sale, whoever can afford them will be able to extract very high profits. GPU miners will be at a disadvantage. And if you have only a small rig with a couple of GPUs at home, your prospects are grim.
You might ask: can’t Ethereum devs do something — say, change the algorithm? Bitcoin algo changes regularly, after all. Unfortunately, Ethereum works differently, so every algorithm change would require a hard fork — with all the consequences it entails. The devs have been talking about introducing a new consensus protocol called ProgPOW (Programmable Proof of Work). It would make the algorithm change regularly and ensure ASIC resistance. But Vitalik Buterin believes that the real goal is a switch to Proof of Stake, not tweaking PoW.
What other options are there to protect small miners from the upcoming wave of ASICs? In our next post, we’ll explain how 2Ether plans to deal with this problem.
Web site — https://2ether.com/ Twitter — https://twitter.com/2Ether_ Discord — https://discord.gg/TuqG4py Facebook — https://www.facebook.com/2Ethe Reddit — https://www.reddit.com/use2Ether Medium — https://medium.com/@2ether Teletype — https://teletype.in/@2ether Telegram — https://t.me/ether2support Telegram chat — https://t.me/blockchain_2ether
submitted by Orchode to ico_crypto [link] [comments]
Bitcoin mixer | Bitwhisk.io
Cryptocurrencies are a perfect means of storing value as well as sending and receiving money across borders. And, following the narrative spawn since their inception, you probably assume that they are also anonymous, right?
Well, cryptocurrencies are, unfortunately, not anonymous. Maybe pseudonymous!
The wallet that stores your cryptocurrencies is identifiable using the public key attached to it. And though this identifier does not necessarily lead to your other personal details, the information is still decipherable via the blockchain.
Here are contextual examples:
°Sending money – When you send money to an acquaintance, the recipient can easily connect you to your wallet, check every incoming and outgoing transaction, and the balance left in the wallet.
°Purchasing goods online – Every time you buy goods online, you are prompted to provide an address so that the vendor can deliver the goods to your doorstep. If you use cryptocurrencies during the purchase, the merchant can link your identity and private information to your private wallet.
The examples above are only two of the possibly hundreds of other use cases that leave you vulnerable and exposed after transacting in crypto. The coins, after all, are not as anonymous as enthusiasts would want you to believe.
By now you are probably wondering if there are alternatives that do not leave you out in the public, and naked! Is it even possible to use and transfer crypto and at the same time, keep this information, including your wallet balance from friends and the public?
At BitWhisk.io, we offer just that; an opportunity to mix your coins within a large pool and get clean coins in the end while also covering private information away from people you transact with.
“Respect your Right to Privacy”
At BitWhisk.io, we are convinced that privacy should be a right and not a privilege and that it should be accorded to everyone. Considering that cryptocurrencies are becoming mainstream, we are developing innovations that allow people to transact conveniently using these coins without necessarily compromising their security.
How To Mix:
No Logs – The platform keeps logs only for as long as is technically necessary to complete a transaction. After which, all information including the link to the mixing process is deleted.
Fully Anonymous – You don’t need to create an account nor send any personal information for you to use our services. Using BitWhisk.io is wholly anonymous.
Wholly Customizable – The platform can work out any transactions sets as you prefer giving you an opportunity to custom set the service fee in thousandth of a percent. Similarly, you can set the delay fee in units of minutes and direct your transaction into as many as 10 receiver addresses per mixing operation.
Easy to Use – We prioritize online customer experience; as such, we have developed a platform that is easy to understand and use.
FAQ 1 – How does it work?
BitWhisk.io has different types of mixing strategies as defined by the pools below.
Traditional and offers the basic type of mixing, where we mix your funds with incoming funds from other clients.
This pool uses three different sources of coins to cleanse your coins. We use parts of huge mixing amounts of the Standard Pool, private reserves of BitWhisk.io and funds from investors.
The Stealth Pool isn't related in any way to coins of the Standard Pool. Instead, it relies only on reserves of BitWhisk.io and Coins from Investors. It is the safest method to mix your coins.
FAQ 2 – How anonymous am I when using BitWhisk.io?
BitWhisk.io afford you complete anonymity. The platform does not keep logs or user information such as deposit and withdrawal addresses permanently. Instead, this information resides in the servers only for as long as is technically necessary for the purposes of completing a transaction. All status pages are deleted alongside the transaction logs not more than 48 hours after a mixing operation. Alternatively, the user can delete this information soon after a transaction.
FAQ 3 – How can you avoid a return of same coins when no data is saved?
As mentioned, we do not save any data in our database, such as deposit and withdrawal addresses or transactions. Such information is only used as long as is technically necessary to complete a transaction and is automatically deleted after. To ensure that our users do not receive the same coins they have mixed earlier, BitWhisk.io uses a One-Way-Encryption process with hashing operations.
Different parameters will be utilized in order to calculate the hashes. The result of the one-way-encryption algorithm will be assigned to the smart code and cannot be deduced from our deposit address. Therefore, the smart code should be entered before each mixing operation.
Additionally, we assign our users one of several pools for each transaction. So, whenever the user has been already assigned a specific Pool for a transaction, he or she will receive withdrawals only from other pools of the same category that are managed internally in our system. Thus, we guarantee the highest security in just two steps and without loss of anonymity. Our users never receive the same coins mixed before with our service.
Support: [[email protected]](mailto:[email protected])
Total Hash Rate (TH/s) The estimated number of terahashes per second the bitcoin network is performing in the last 24 hours. 30 Days 60 Days 180 Days 1 Year 3 Years All Time Raw Values 7 Day Average 30 Day Average This site is owned by hashminersltd Ltd. Trust Company complex, E Raintree, N Frank Lloyd Wright Blvd, 15150 North Hayden Road #200, Scottsdale, AZ 85260, USA. A bitcoin mining calculator considers the cost of electricity, the cost of Bitcoins, the hash rate and various other factors such as the difficulty of mining, pool fees, block rewards etc. to determine the hourly, daily, weekly, monthly and yearly profit that you would make on your mining activity. Accurate BitcoinCash mining calculator trusted by millions of cryptocurrency miners. Updated in 2020, the newest version of the BitcoinCash profit calculator makes it simple and easy to quickly calculate mining profitability for your BitcoinCash mining hardware. The bitcoin return calculator uses data from BraveNewCoin via Quandl as well as historical bitcoin return data from Bitcoinity.. Using the Bitcoin Price Return Calculator. There are only a few options when using the bitcoin return calculator, but any small adjustments can have major effects on your results.
[index]          
bitcoin calculator bitcoin chart bitcoin currency bitcoin rate buy bitcoins with credit card ... How to get a Transaction Hash I.d on Coinbase Bitcoin wallet using a Phone. A brief and simple introduction to the hash function and how blockchain solutions use it for proof of work (mining) and data integrity (Merkle Trees). Bitcoin is a digital currency, which is supported by a P2P network of computers across the internet that act as servers to process the financial transactions of this currency. In this video I cover how to calculate mining profitability and important factors to consider. New To Crypto? Buy $100 of BTC and get $10 Free! https://www.c... By using this calculator we can calculatehow mutch BTC amount generate in Hash power output in cryptocurrency mining and cloud mining, ... Bitcoin Mining Roi Calculator 2017 with Genesis Mining!