Bitcoin.com Paper Wallet

Cryptocurrency Platform

A decentralized crypto platform where users automatically receive airdrops from our partners simply for holding our coins // $CSTL // [email protected]
[link]

Cryptocurrency News & Discussion

The official source for CryptoCurrency News, Discussion & Analysis.
[link]

Neo

[link]

Why i’m bullish on Zilliqa (long read)

Edit: TL;DR added in the comments
 
Hey all, I've been researching coins since 2017 and have gone through 100s of them in the last 3 years. I got introduced to blockchain via Bitcoin of course, analyzed Ethereum thereafter and from that moment I have a keen interest in smart contact platforms. I’m passionate about Ethereum but I find Zilliqa to have a better risk-reward ratio. Especially because Zilliqa has found an elegant balance between being secure, decentralized and scalable in my opinion.
 
Below I post my analysis of why from all the coins I went through I’m most bullish on Zilliqa (yes I went through Tezos, EOS, NEO, VeChain, Harmony, Algorand, Cardano etc.). Note that this is not investment advice and although it's a thorough analysis there is obviously some bias involved. Looking forward to what you all think!
 
Fun fact: the name Zilliqa is a play on ‘silica’ silicon dioxide which means “Silicon for the high-throughput consensus computer.”
 
This post is divided into (i) Technology, (ii) Business & Partnerships, and (iii) Marketing & Community. I’ve tried to make the technology part readable for a broad audience. If you’ve ever tried understanding the inner workings of Bitcoin and Ethereum you should be able to grasp most parts. Otherwise, just skim through and once you are zoning out head to the next part.
 
Technology and some more:
 
Introduction
 
The technology is one of the main reasons why I’m so bullish on Zilliqa. First thing you see on their website is: “Zilliqa is a high-performance, high-security blockchain platform for enterprises and next-generation applications.” These are some bold statements.
 
Before we deep dive into the technology let’s take a step back in time first as they have quite the history. The initial research paper from which Zilliqa originated dates back to August 2016: Elastico: A Secure Sharding Protocol For Open Blockchains where Loi Luu (Kyber Network) is one of the co-authors. Other ideas that led to the development of what Zilliqa has become today are: Bitcoin-NG, collective signing CoSi, ByzCoin and Omniledger.
 
The technical white paper was made public in August 2017 and since then they have achieved everything stated in the white paper and also created their own open source intermediate level smart contract language called Scilla (functional programming language similar to OCaml) too.
 
Mainnet is live since the end of January 2019 with daily transaction rates growing continuously. About a week ago mainnet reached 5 million transactions, 500.000+ addresses in total along with 2400 nodes keeping the network decentralized and secure. Circulating supply is nearing 11 billion and currently only mining rewards are left. The maximum supply is 21 billion with annual inflation being 7.13% currently and will only decrease with time.
 
Zilliqa realized early on that the usage of public cryptocurrencies and smart contracts were increasing but decentralized, secure, and scalable alternatives were lacking in the crypto space. They proposed to apply sharding onto a public smart contract blockchain where the transaction rate increases almost linear with the increase in the amount of nodes. More nodes = higher transaction throughput and increased decentralization. Sharding comes in many forms and Zilliqa uses network-, transaction- and computational sharding. Network sharding opens up the possibility of using transaction- and computational sharding on top. Zilliqa does not use state sharding for now. We’ll come back to this later.
 
Before we continue dissecting how Zilliqa achieves such from a technological standpoint it’s good to keep in mind that a blockchain being decentralised and secure and scalable is still one of the main hurdles in allowing widespread usage of decentralised networks. In my opinion this needs to be solved first before blockchains can get to the point where they can create and add large scale value. So I invite you to read the next section to grasp the underlying fundamentals. Because after all these premises need to be true otherwise there isn’t a fundamental case to be bullish on Zilliqa, right?
 
Down the rabbit hole
 
How have they achieved this? Let’s define the basics first: key players on Zilliqa are the users and the miners. A user is anybody who uses the blockchain to transfer funds or run smart contracts. Miners are the (shard) nodes in the network who run the consensus protocol and get rewarded for their service in Zillings (ZIL). The mining network is divided into several smaller networks called shards, which is also referred to as ‘network sharding’. Miners subsequently are randomly assigned to a shard by another set of miners called DS (Directory Service) nodes. The regular shards process transactions and the outputs of these shards are eventually combined by the DS shard as they reach consensus on the final state. More on how these DS shards reach consensus (via pBFT) will be explained later on.
 
The Zilliqa network produces two types of blocks: DS blocks and Tx blocks. One DS Block consists of 100 Tx Blocks. And as previously mentioned there are two types of nodes concerned with reaching consensus: shard nodes and DS nodes. Becoming a shard node or DS node is being defined by the result of a PoW cycle (Ethash) at the beginning of the DS Block. All candidate mining nodes compete with each other and run the PoW (Proof-of-Work) cycle for 60 seconds and the submissions achieving the highest difficulty will be allowed on the network. And to put it in perspective: the average difficulty for one DS node is ~ 2 Th/s equaling 2.000.000 Mh/s or 55 thousand+ GeForce GTX 1070 / 8 GB GPUs at 35.4 Mh/s. Each DS Block 10 new DS nodes are allowed. And a shard node needs to provide around 8.53 GH/s currently (around 240 GTX 1070s). Dual mining ETH/ETC and ZIL is possible and can be done via mining software such as Phoenix and Claymore. There are pools and if you have large amounts of hashing power (Ethash) available you could mine solo.
 
The PoW cycle of 60 seconds is a peak performance and acts as an entry ticket to the network. The entry ticket is called a sybil resistance mechanism and makes it incredibly hard for adversaries to spawn lots of identities and manipulate the network with these identities. And after every 100 Tx Blocks which corresponds to roughly 1,5 hour this PoW process repeats. In between these 1,5 hour, no PoW needs to be done meaning Zilliqa’s energy consumption to keep the network secure is low. For more detailed information on how mining works click here.
Okay, hats off to you. You have made it this far. Before we go any deeper down the rabbit hole we first must understand why Zilliqa goes through all of the above technicalities and understand a bit more what a blockchain on a more fundamental level is. Because the core of Zilliqa’s consensus protocol relies on the usage of pBFT (practical Byzantine Fault Tolerance) we need to know more about state machines and their function. Navigate to Viewblock, a Zilliqa block explorer, and just come back to this article. We will use this site to navigate through a few concepts.
 
We have established that Zilliqa is a public and distributed blockchain. Meaning that everyone with an internet connection can send ZILs, trigger smart contracts, etc. and there is no central authority who fully controls the network. Zilliqa and other public and distributed blockchains (like Bitcoin and Ethereum) can also be defined as state machines.
 
Taking the liberty of paraphrasing examples and definitions given by Samuel Brooks’ medium article, he describes the definition of a blockchain (like Zilliqa) as: “A peer-to-peer, append-only datastore that uses consensus to synchronize cryptographically-secure data”.
 
Next, he states that: "blockchains are fundamentally systems for managing valid state transitions”. For some more context, I recommend reading the whole medium article to get a better grasp of the definitions and understanding of state machines. Nevertheless, let’s try to simplify and compile it into a single paragraph. Take traffic lights as an example: all its states (red, amber, and green) are predefined, all possible outcomes are known and it doesn’t matter if you encounter the traffic light today or tomorrow. It will still behave the same. Managing the states of a traffic light can be done by triggering a sensor on the road or pushing a button resulting in one traffic lights’ state going from green to red (via amber) and another light from red to green.
 
With public blockchains like Zilliqa, this isn’t so straightforward and simple. It started with block #1 almost 1,5 years ago and every 45 seconds or so a new block linked to the previous block is being added. Resulting in a chain of blocks with transactions in it that everyone can verify from block #1 to the current #647.000+ block. The state is ever changing and the states it can find itself in are infinite. And while the traffic light might work together in tandem with various other traffic lights, it’s rather insignificant comparing it to a public blockchain. Because Zilliqa consists of 2400 nodes who need to work together to achieve consensus on what the latest valid state is while some of these nodes may have latency or broadcast issues, drop offline or are deliberately trying to attack the network, etc.
 
Now go back to the Viewblock page take a look at the amount of transaction, addresses, block and DS height and then hit refresh. Obviously as expected you see new incremented values on one or all parameters. And how did the Zilliqa blockchain manage to transition from a previous valid state to the latest valid state? By using pBFT to reach consensus on the latest valid state.
 
After having obtained the entry ticket, miners execute pBFT to reach consensus on the ever-changing state of the blockchain. pBFT requires a series of network communication between nodes, and as such there is no GPU involved (but CPU). Resulting in the total energy consumed to keep the blockchain secure, decentralized and scalable being low.
 
pBFT stands for practical Byzantine Fault Tolerance and is an optimization on the Byzantine Fault Tolerant algorithm. To quote Blockonomi: “In the context of distributed systems, Byzantine Fault Tolerance is the ability of a distributed computer network to function as desired and correctly reach a sufficient consensus despite malicious components (nodes) of the system failing or propagating incorrect information to other peers.” Zilliqa is such a distributed computer network and depends on the honesty of the nodes (shard and DS) to reach consensus and to continuously update the state with the latest block. If pBFT is a new term for you I can highly recommend the Blockonomi article.
 
The idea of pBFT was introduced in 1999 - one of the authors even won a Turing award for it - and it is well researched and applied in various blockchains and distributed systems nowadays. If you want more advanced information than the Blockonomi link provides click here. And if you’re in between Blockonomi and the University of Singapore read the Zilliqa Design Story Part 2 dating from October 2017.
Quoting from the Zilliqa tech whitepaper: “pBFT relies upon a correct leader (which is randomly selected) to begin each phase and proceed when the sufficient majority exists. In case the leader is byzantine it can stall the entire consensus protocol. To address this challenge, pBFT offers a view change protocol to replace the byzantine leader with another one.”
 
pBFT can tolerate ⅓ of the nodes being dishonest (offline counts as Byzantine = dishonest) and the consensus protocol will function without stalling or hiccups. Once there are more than ⅓ of dishonest nodes but no more than ⅔ the network will be stalled and a view change will be triggered to elect a new DS leader. Only when more than ⅔ of the nodes are dishonest (66%) double-spend attacks become possible.
 
If the network stalls no transactions can be processed and one has to wait until a new honest leader has been elected. When the mainnet was just launched and in its early phases, view changes happened regularly. As of today the last stalling of the network - and view change being triggered - was at the end of October 2019.
 
Another benefit of using pBFT for consensus besides low energy is the immediate finality it provides. Once your transaction is included in a block and the block is added to the chain it’s done. Lastly, take a look at this article where three types of finality are being defined: probabilistic, absolute and economic finality. Zilliqa falls under the absolute finality (just like Tendermint for example). Although lengthy already we skipped through some of the inner workings from Zilliqa’s consensus: read the Zilliqa Design Story Part 3 and you will be close to having a complete picture on it. Enough about PoW, sybil resistance mechanism, pBFT, etc. Another thing we haven’t looked at yet is the amount of decentralization.
 
Decentralisation
 
Currently, there are four shards, each one of them consisting of 600 nodes. 1 shard with 600 so-called DS nodes (Directory Service - they need to achieve a higher difficulty than shard nodes) and 1800 shard nodes of which 250 are shard guards (centralized nodes controlled by the team). The amount of shard guards has been steadily declining from 1200 in January 2019 to 250 as of May 2020. On the Viewblock statistics, you can see that many of the nodes are being located in the US but those are only the (CPU parts of the) shard nodes who perform pBFT. There is no data from where the PoW sources are coming. And when the Zilliqa blockchain starts reaching its transaction capacity limit, a network upgrade needs to be executed to lift the current cap of maximum 2400 nodes to allow more nodes and formation of more shards which will allow to network to keep on scaling according to demand.
Besides shard nodes there are also seed nodes. The main role of seed nodes is to serve as direct access points (for end-users and clients) to the core Zilliqa network that validates transactions. Seed nodes consolidate transaction requests and forward these to the lookup nodes (another type of nodes) for distribution to the shards in the network. Seed nodes also maintain the entire transaction history and the global state of the blockchain which is needed to provide services such as block explorers. Seed nodes in the Zilliqa network are comparable to Infura on Ethereum.
 
The seed nodes were first only operated by Zilliqa themselves, exchanges and Viewblock. Operators of seed nodes like exchanges had no incentive to open them for the greater public. They were centralised at first. Decentralisation at the seed nodes level has been steadily rolled out since March 2020 ( Zilliqa Improvement Proposal 3 ). Currently the amount of seed nodes is being increased, they are public-facing and at the same time PoS is applied to incentivize seed node operators and make it possible for ZIL holders to stake and earn passive yields. Important distinction: seed nodes are not involved with consensus! That is still PoW as entry ticket and pBFT for the actual consensus.
 
5% of the block rewards are being assigned to seed nodes (from the beginning in 2019) and those are being used to pay out ZIL stakers. The 5% block rewards with an annual yield of 10.03% translate to roughly 610 MM ZILs in total that can be staked. Exchanges use the custodial variant of staking and wallets like Moonlet will use the non-custodial version (starting in Q3 2020). Staking is being done by sending ZILs to a smart contract created by Zilliqa and audited by Quantstamp.
 
With a high amount of DS; shard nodes and seed nodes becoming more decentralized too, Zilliqa qualifies for the label of decentralized in my opinion.
 
Smart contracts
 
Let me start by saying I’m not a developer and my programming skills are quite limited. So I‘m taking the ELI5 route (maybe 12) but if you are familiar with Javascript, Solidity or specifically OCaml please head straight to Scilla - read the docs to get a good initial grasp of how Zilliqa’s smart contract language Scilla works and if you ask yourself “why another programming language?” check this article. And if you want to play around with some sample contracts in an IDE click here. The faucet can be found here. And more information on architecture, dapp development and API can be found on the Developer Portal.
If you are more into listening and watching: check this recent webinar explaining Zilliqa and Scilla. Link is time-stamped so you’ll start right away with a platform introduction, roadmap 2020 and afterwards a proper Scilla introduction.
 
Generalized: programming languages can be divided into being ‘object-oriented’ or ‘functional’. Here is an ELI5 given by software development academy: * “all programs have two basic components, data – what the program knows – and behavior – what the program can do with that data. So object-oriented programming states that combining data and related behaviors in one place, is called “object”, which makes it easier to understand how a particular program works. On the other hand, functional programming argues that data and behavior are different things and should be separated to ensure their clarity.” *
 
Scilla is on the functional side and shares similarities with OCaml: OCaml is a general-purpose programming language with an emphasis on expressiveness and safety. It has an advanced type system that helps catch your mistakes without getting in your way. It's used in environments where a single mistake can cost millions and speed matters, is supported by an active community, and has a rich set of libraries and development tools. For all its power, OCaml is also pretty simple, which is one reason it's often used as a teaching language.
 
Scilla is blockchain agnostic, can be implemented onto other blockchains as well, is recognized by academics and won a so-called Distinguished Artifact Award award at the end of last year.
 
One of the reasons why the Zilliqa team decided to create their own programming language focused on preventing smart contract vulnerabilities is that adding logic on a blockchain, programming, means that you cannot afford to make mistakes. Otherwise, it could cost you. It’s all great and fun blockchains being immutable but updating your code because you found a bug isn’t the same as with a regular web application for example. And with smart contracts, it inherently involves cryptocurrencies in some form thus value.
 
Another difference with programming languages on a blockchain is gas. Every transaction you do on a smart contract platform like Zilliqa or Ethereum costs gas. With gas you basically pay for computational costs. Sending a ZIL from address A to address B costs 0.001 ZIL currently. Smart contracts are more complex, often involve various functions and require more gas (if gas is a new concept click here ).
 
So with Scilla, similar to Solidity, you need to make sure that “every function in your smart contract will run as expected without hitting gas limits. An improper resource analysis may lead to situations where funds may get stuck simply because a part of the smart contract code cannot be executed due to gas limits. Such constraints are not present in traditional software systems”. Scilla design story part 1
 
Some examples of smart contract issues you’d want to avoid are: leaking funds, ‘unexpected changes to critical state variables’ (example: someone other than you setting his or her address as the owner of the smart contract after creation) or simply killing a contract.
 
Scilla also allows for formal verification. Wikipedia to the rescue: In the context of hardware and software systems, formal verification is the act of proving or disproving the correctness of intended algorithms underlying a system with respect to a certain formal specification or property, using formal methods of mathematics.
 
Formal verification can be helpful in proving the correctness of systems such as: cryptographic protocols, combinational circuits, digital circuits with internal memory, and software expressed as source code.
 
Scilla is being developed hand-in-hand with formalization of its semantics and its embedding into the Coq proof assistant — a state-of-the art tool for mechanized proofs about properties of programs.”
 
Simply put, with Scilla and accompanying tooling developers can be mathematically sure and proof that the smart contract they’ve written does what he or she intends it to do.
 
Smart contract on a sharded environment and state sharding
 
There is one more topic I’d like to touch on: smart contract execution in a sharded environment (and what is the effect of state sharding). This is a complex topic. I’m not able to explain it any easier than what is posted here. But I will try to compress the post into something easy to digest.
 
Earlier on we have established that Zilliqa can process transactions in parallel due to network sharding. This is where the linear scalability comes from. We can define simple transactions: a transaction from address A to B (Category 1), a transaction where a user interacts with one smart contract (Category 2) and the most complex ones where triggering a transaction results in multiple smart contracts being involved (Category 3). The shards are able to process transactions on their own without interference of the other shards. With Category 1 transactions that is doable, with Category 2 transactions sometimes if that address is in the same shard as the smart contract but with Category 3 you definitely need communication between the shards. Solving that requires to make a set of communication rules the protocol needs to follow in order to process all transactions in a generalised fashion.
 
And this is where the downsides of state sharding comes in currently. All shards in Zilliqa have access to the complete state. Yes the state size (0.1 GB at the moment) grows and all of the nodes need to store it but it also means that they don’t need to shop around for information available on other shards. Requiring more communication and adding more complexity. Computer science knowledge and/or developer knowledge required links if you want to dig further: Scilla - language grammar Scilla - Foundations for Verifiable Decentralised Computations on a Blockchain Gas Accounting NUS x Zilliqa: Smart contract language workshop
 
Easier to follow links on programming Scilla https://learnscilla.com/home Ivan on Tech
 
Roadmap / Zilliqa 2.0
 
There is no strict defined roadmap but here are topics being worked on. And via the Zilliqa website there is also more information on the projects they are working on.
 
Business & Partnerships
 
It’s not only technology in which Zilliqa seems to be excelling as their ecosystem has been expanding and starting to grow rapidly. The project is on a mission to provide OpenFinance (OpFi) to the world and Singapore is the right place to be due to its progressive regulations and futuristic thinking. Singapore has taken a proactive approach towards cryptocurrencies by introducing the Payment Services Act 2019 (PS Act). Among other things, the PS Act will regulate intermediaries dealing with certain cryptocurrencies, with a particular focus on consumer protection and anti-money laundering. It will also provide a stable regulatory licensing and operating framework for cryptocurrency entities, effectively covering all crypto businesses and exchanges based in Singapore. According to PWC 82% of the surveyed executives in Singapore reported blockchain initiatives underway and 13% of them have already brought the initiatives live to the market. There is also an increasing list of organizations that are starting to provide digital payment services. Moreover, Singaporean blockchain developers Building Cities Beyond has recently created an innovation $15 million grant to encourage development on its ecosystem. This all suggests that Singapore tries to position itself as (one of) the leading blockchain hubs in the world.
 
Zilliqa seems to already take advantage of this and recently helped launch Hg Exchange on their platform, together with financial institutions PhillipCapital, PrimePartners and Fundnel. Hg Exchange, which is now approved by the Monetary Authority of Singapore (MAS), uses smart contracts to represent digital assets. Through Hg Exchange financial institutions worldwide can use Zilliqa's safe-by-design smart contracts to enable the trading of private equities. For example, think of companies such as Grab, Airbnb, SpaceX that are not available for public trading right now. Hg Exchange will allow investors to buy shares of private companies & unicorns and capture their value before an IPO. Anquan, the main company behind Zilliqa, has also recently announced that they became a partner and shareholder in TEN31 Bank, which is a fully regulated bank allowing for tokenization of assets and is aiming to bridge the gap between conventional banking and the blockchain world. If STOs, the tokenization of assets, and equity trading will continue to increase, then Zilliqa’s public blockchain would be the ideal candidate due to its strategic positioning, partnerships, regulatory compliance and the technology that is being built on top of it.
 
What is also very encouraging is their focus on banking the un(der)banked. They are launching a stablecoin basket starting with XSGD. As many of you know, stablecoins are currently mostly used for trading. However, Zilliqa is actively trying to broaden the use case of stablecoins. I recommend everybody to read this text that Amrit Kumar wrote (one of the co-founders). These stablecoins will be integrated in the traditional markets and bridge the gap between the crypto world and the traditional world. This could potentially revolutionize and legitimise the crypto space if retailers and companies will for example start to use stablecoins for payments or remittances, instead of it solely being used for trading.
 
Zilliqa also released their DeFi strategic roadmap (dating November 2019) which seems to be aligning well with their OpFi strategy. A non-custodial DEX is coming to Zilliqa made by Switcheo which allows cross-chain trading (atomic swaps) between ETH, EOS and ZIL based tokens. They also signed a Memorandum of Understanding for a (soon to be announced) USD stablecoin. And as Zilliqa is all about regulations and being compliant, I’m speculating on it to be a regulated USD stablecoin. Furthermore, XSGD is already created and visible on block explorer and XIDR (Indonesian Stablecoin) is also coming soon via StraitsX. Here also an overview of the Tech Stack for Financial Applications from September 2019. Further quoting Amrit Kumar on this:
 
There are two basic building blocks in DeFi/OpFi though: 1) stablecoins as you need a non-volatile currency to get access to this market and 2) a dex to be able to trade all these financial assets. The rest are built on top of these blocks.
 
So far, together with our partners and community, we have worked on developing these building blocks with XSGD as a stablecoin. We are working on bringing a USD-backed stablecoin as well. We will soon have a decentralised exchange developed by Switcheo. And with HGX going live, we are also venturing into the tokenization space. More to come in the future.”
 
Additionally, they also have this ZILHive initiative that injects capital into projects. There have been already 6 waves of various teams working on infrastructure, innovation and research, and they are not from ASEAN or Singapore only but global: see Grantees breakdown by country. Over 60 project teams from over 20 countries have contributed to Zilliqa's ecosystem. This includes individuals and teams developing wallets, explorers, developer toolkits, smart contract testing frameworks, dapps, etc. As some of you may know, Unstoppable Domains (UD) blew up when they launched on Zilliqa. UD aims to replace cryptocurrency addresses with a human-readable name and allows for uncensorable websites. Zilliqa will probably be the only one able to handle all these transactions onchain due to ability to scale and its resulting low fees which is why the UD team launched this on Zilliqa in the first place. Furthermore, Zilliqa also has a strong emphasis on security, compliance, and privacy, which is why they partnered with companies like Elliptic, ChainSecurity (part of PwC Switzerland), and Incognito. Their sister company Aqilliz (Zilliqa spelled backwards) focuses on revolutionizing the digital advertising space and is doing interesting things like using Zilliqa to track outdoor digital ads with companies like Foodpanda.
 
Zilliqa is listed on nearly all major exchanges, having several different fiat-gateways and recently have been added to Binance’s margin trading and futures trading with really good volume. They also have a very impressive team with good credentials and experience. They don't just have “tech people”. They have a mix of tech people, business people, marketeers, scientists, and more. Naturally, it's good to have a mix of people with different skill sets if you work in the crypto space.
 
Marketing & Community
 
Zilliqa has a very strong community. If you just follow their Twitter their engagement is much higher for a coin that has approximately 80k followers. They also have been ‘coin of the day’ by LunarCrush many times. LunarCrush tracks real-time cryptocurrency value and social data. According to their data, it seems Zilliqa has a more fundamental and deeper understanding of marketing and community engagement than almost all other coins. While almost all coins have been a bit frozen in the last months, Zilliqa seems to be on its own bull run. It was somewhere in the 100s a few months ago and is currently ranked #46 on CoinGecko. Their official Telegram also has over 20k people and is very active, and their community channel which is over 7k now is more active and larger than many other official channels. Their local communities also seem to be growing.
 
Moreover, their community started ‘Zillacracy’ together with the Zilliqa core team ( see www.zillacracy.com ). It’s a community-run initiative where people from all over the world are now helping with marketing and development on Zilliqa. Since its launch in February 2020 they have been doing a lot and will also run their own non-custodial seed node for staking. This seed node will also allow them to start generating revenue for them to become a self sustaining entity that could potentially scale up to become a decentralized company working in parallel with the Zilliqa core team. Comparing it to all the other smart contract platforms (e.g. Cardano, EOS, Tezos etc.) they don't seem to have started a similar initiative (correct me if I’m wrong though). This suggests in my opinion that these other smart contract platforms do not fully understand how to utilize the ‘power of the community’. This is something you cannot ‘buy with money’ and gives many projects in the space a disadvantage.
 
Zilliqa also released two social products called SocialPay and Zeeves. SocialPay allows users to earn ZILs while tweeting with a specific hashtag. They have recently used it in partnership with the Singapore Red Cross for a marketing campaign after their initial pilot program. It seems like a very valuable social product with a good use case. I can see a lot of traditional companies entering the space through this product, which they seem to suggest will happen. Tokenizing hashtags with smart contracts to get network effect is a very smart and innovative idea.
 
Regarding Zeeves, this is a tipping bot for Telegram. They already have 1000s of signups and they plan to keep upgrading it for more and more people to use it (e.g. they recently have added a quiz features). They also use it during AMAs to reward people in real-time. It’s a very smart approach to grow their communities and get familiar with ZIL. I can see this becoming very big on Telegram. This tool suggests, again, that the Zilliqa team has a deeper understanding of what the crypto space and community needs and is good at finding the right innovative tools to grow and scale.
 
To be honest, I haven’t covered everything (i’m also reaching the character limited haha). So many updates happening lately that it's hard to keep up, such as the International Monetary Fund mentioning Zilliqa in their report, custodial and non-custodial Staking, Binance Margin, Futures, Widget, entering the Indian market, and more. The Head of Marketing Colin Miles has also released this as an overview of what is coming next. And last but not least, Vitalik Buterin has been mentioning Zilliqa lately acknowledging Zilliqa and mentioning that both projects have a lot of room to grow. There is much more info of course and a good part of it has been served to you on a silver platter. I invite you to continue researching by yourself :-) And if you have any comments or questions please post here!
submitted by haveyouheardaboutit to CryptoCurrency [link] [comments]

Cobra’s progression

I have enjoyed watching Cobra slowly change his public position on several things. It's never too late to make up for ones mistakes in my eyes!
Still, maybe this is a fun opportunity to revisit some of the highlights of Cobra's tenure over Bitcoin.org.
15 June 2015: Bitcoin.org introduces an official ‘position on hard-forks,’ which meant it would not promote XT.
Bitcoin.org will not promote software or services that will leave the previous consensus because of a contentious hard fork attempt.
26 December 2015: Cobra makes a Github issue to remove Coinbase from the “choose your wallet” page on Bitcoin.org to punish them for running a Bitcoin XT node in addition to their Bitcoin Core node.
01 July 2016: Cobra posts on Github that he wants to update the Bitcoin whitepaper because it confuses people.
03 July 2017: An issue is open on the Bitcoin.org Github account titled Removal of BTC.com wallet?
Cobra replies that he doesn’t mind if they are removed from the website as punishment because of their association with Jihan Wu and therefore, big block efforts.
They’re associated with that monster Jihan Wu, so I don’t mind if they get removed because of this, they’re terrible people. I definitely feel like a line has been crossed here.
28 September 2017: Cobra opens a Github issue for Bitcoin.org labeled Add Segwit2x Safety Alert. The alert ostensibly warns users of hostile companies, but the list includes most of the oldest, most successful Bitcoin companies, and the real goal seems to be to scare or punish these companies for their stance on Segwit 2x.
08 November 2017: Theymos creates a Github issue titled Policy to fight against “miners control Bitcoin” narrative.
Hilariously, Cobra replies in agreement and blames this misconception on the white paper itself.
11 August 2018: Cobra creates a Github issue to discuss relisting companies that were removed from Bitcoin.org for supporting the 2mb hard fork block size increase. His reasoning is that the delisting worked to stop the increase and that these companies are unlikely to try it again.
You will be missed Cobra! If you are interested in appointing a member of Bitcoin.org who will be more open to competing ideas, I invite you to DM me. I am very familiar with the Jekyll static site generator you're currently using.
submitted by MemoryDealers to btc [link] [comments]

Why i’m bullish on Zilliqa (long read)

Hey all, I've been researching coins since 2017 and have gone through 100s of them in the last 3 years. I got introduced to blockchain via Bitcoin of course, analysed Ethereum thereafter and from that moment I have a keen interest in smart contact platforms. I’m passionate about Ethereum but I find Zilliqa to have a better risk reward ratio. Especially because Zilliqa has found an elegant balance between being secure, decentralised and scalable in my opinion.
 
Below I post my analysis why from all the coins I went through I’m most bullish on Zilliqa (yes I went through Tezos, EOS, NEO, VeChain, Harmony, Algorand, Cardano etc.). Note that this is not investment advice and although it's a thorough analysis there is obviously some bias involved. Looking forward to what you all think!
 
Fun fact: the name Zilliqa is a play on ‘silica’ silicon dioxide which means “Silicon for the high-throughput consensus computer.”
 
This post is divided into (i) Technology, (ii) Business & Partnerships, and (iii) Marketing & Community. I’ve tried to make the technology part readable for a broad audience. If you’ve ever tried understanding the inner workings of Bitcoin and Ethereum you should be able to grasp most parts. Otherwise just skim through and once you are zoning out head to the next part.
 
Technology and some more:
 
Introduction The technology is one of the main reasons why I’m so bullish on Zilliqa. First thing you see on their website is: “Zilliqa is a high-performance, high-security blockchain platform for enterprises and next-generation applications.” These are some bold statements.
 
Before we deep dive into the technology let’s take a step back in time first as they have quite the history. The initial research paper from which Zilliqa originated dates back to August 2016: Elastico: A Secure Sharding Protocol For Open Blockchains where Loi Luu (Kyber Network) is one of the co-authors. Other ideas that led to the development of what Zilliqa has become today are: Bitcoin-NG, collective signing CoSi, ByzCoin and Omniledger.
 
The technical white paper was made public in August 2017 and since then they have achieved everything stated in the white paper and also created their own open source intermediate level smart contract language called Scilla (functional programming language similar to OCaml) too.
 
Mainnet is live since end of January 2019 with daily transaction rate growing continuously. About a week ago mainnet reached 5 million transactions, 500.000+ addresses in total along with 2400 nodes keeping the network decentralised and secure. Circulating supply is nearing 11 billion and currently only mining rewards are left. Maximum supply is 21 billion with annual inflation being 7.13% currently and will only decrease with time.
 
Zilliqa realised early on that the usage of public cryptocurrencies and smart contracts were increasing but decentralised, secure and scalable alternatives were lacking in the crypto space. They proposed to apply sharding onto a public smart contract blockchain where the transaction rate increases almost linear with the increase in amount of nodes. More nodes = higher transaction throughput and increased decentralisation. Sharding comes in many forms and Zilliqa uses network-, transaction- and computational sharding. Network sharding opens up the possibility of using transaction- and computational sharding on top. Zilliqa does not use state sharding for now. We’ll come back to this later.
 
Before we continue disecting how Zilliqa achieves such from a technological standpoint it’s good to keep in mind that a blockchain being decentralised and secure and scalable is still one of the main hurdles in allowing widespread usage of decentralised networks. In my opinion this needs to be solved first before blockchains can get to the point where they can create and add large scale value. So I invite you to read the next section to grasp the underlying fundamentals. Because after all these premises need to be true otherwise there isn’t a fundamental case to be bullish on Zilliqa, right?
 
Down the rabbit hole
 
How have they achieved this? Let’s define the basics first: key players on Zilliqa are the users and the miners. A user is anybody who uses the blockchain to transfer funds or run smart contracts. Miners are the (shard) nodes in the network who run the consensus protocol and get rewarded for their service in Zillings (ZIL). The mining network is divided into several smaller networks called shards, which is also referred to as ‘network sharding’. Miners subsequently are randomly assigned to a shard by another set of miners called DS (Directory Service) nodes. The regular shards process transactions and the outputs of these shards are eventually combined by the DS shard as they reach consensus on the final state. More on how these DS shards reach consensus (via pBFT) will be explained later on.
 
The Zilliqa network produces two types of blocks: DS blocks and Tx blocks. One DS Block consists of 100 Tx Blocks. And as previously mentioned there are two types of nodes concerned with reaching consensus: shard nodes and DS nodes. Becoming a shard node or DS node is being defined by the result of a PoW cycle (Ethash) at the beginning of the DS Block. All candidate mining nodes compete with each other and run the PoW (Proof-of-Work) cycle for 60 seconds and the submissions achieving the highest difficulty will be allowed on the network. And to put it in perspective: the average difficulty for one DS node is ~ 2 Th/s equaling 2.000.000 Mh/s or 55 thousand+ GeForce GTX 1070 / 8 GB GPUs at 35.4 Mh/s. Each DS Block 10 new DS nodes are allowed. And a shard node needs to provide around 8.53 GH/s currently (around 240 GTX 1070s). Dual mining ETH/ETC and ZIL is possible and can be done via mining software such as Phoenix and Claymore. There are pools and if you have large amounts of hashing power (Ethash) available you could mine solo.
 
The PoW cycle of 60 seconds is a peak performance and acts as an entry ticket to the network. The entry ticket is called a sybil resistance mechanism and makes it incredibly hard for adversaries to spawn lots of identities and manipulate the network with these identities. And after every 100 Tx Blocks which corresponds to roughly 1,5 hour this PoW process repeats. In between these 1,5 hour no PoW needs to be done meaning Zilliqa’s energy consumption to keep the network secure is low. For more detailed information on how mining works click here.
Okay, hats off to you. You have made it this far. Before we go any deeper down the rabbit hole we first must understand why Zilliqa goes through all of the above technicalities and understand a bit more what a blockchain on a more fundamental level is. Because the core of Zilliqa’s consensus protocol relies on the usage of pBFT (practical Byzantine Fault Tolerance) we need to know more about state machines and their function. Navigate to Viewblock, a Zilliqa block explorer, and just come back to this article. We will use this site to navigate through a few concepts.
 
We have established that Zilliqa is a public and distributed blockchain. Meaning that everyone with an internet connection can send ZILs, trigger smart contracts etc. and there is no central authority who fully controls the network. Zilliqa and other public and distributed blockchains (like Bitcoin and Ethereum) can also be defined as state machines.
 
Taking the liberty of paraphrasing examples and definitions given by Samuel Brooks’ medium article, he describes the definition of a blockchain (like Zilliqa) as:
“A peer-to-peer, append-only datastore that uses consensus to synchronise cryptographically-secure data”.
 
Next he states that: >“blockchains are fundamentally systems for managing valid state transitions”.* For some more context, I recommend reading the whole medium article to get a better grasp of the definitions and understanding of state machines. Nevertheless, let’s try to simplify and compile it into a single paragraph. Take traffic lights as an example: all its states (red, amber and green) are predefined, all possible outcomes are known and it doesn’t matter if you encounter the traffic light today or tomorrow. It will still behave the same. Managing the states of a traffic light can be done by triggering a sensor on the road or pushing a button resulting in one traffic lights’ state going from green to red (via amber) and another light from red to green.
 
With public blockchains like Zilliqa this isn’t so straightforward and simple. It started with block #1 almost 1,5 years ago and every 45 seconds or so a new block linked to the previous block is being added. Resulting in a chain of blocks with transactions in it that everyone can verify from block #1 to the current #647.000+ block. The state is ever changing and the states it can find itself in are infinite. And while the traffic light might work together in tandem with various other traffic lights, it’s rather insignificant comparing it to a public blockchain. Because Zilliqa consists of 2400 nodes who need to work together to achieve consensus on what the latest valid state is while some of these nodes may have latency or broadcast issues, drop offline or are deliberately trying to attack the network etc.
 
Now go back to the Viewblock page take a look at the amount of transaction, addresses, block and DS height and then hit refresh. Obviously as expected you see new incremented values on one or all parameters. And how did the Zilliqa blockchain manage to transition from a previous valid state to the latest valid state? By using pBFT to reach consensus on the latest valid state.
 
After having obtained the entry ticket, miners execute pBFT to reach consensus on the ever changing state of the blockchain. pBFT requires a series of network communication between nodes, and as such there is no GPU involved (but CPU). Resulting in the total energy consumed to keep the blockchain secure, decentralised and scalable being low.
 
pBFT stands for practical Byzantine Fault Tolerance and is an optimisation on the Byzantine Fault Tolerant algorithm. To quote Blockonomi: “In the context of distributed systems, Byzantine Fault Tolerance is the ability of a distributed computer network to function as desired and correctly reach a sufficient consensus despite malicious components (nodes) of the system failing or propagating incorrect information to other peers.” Zilliqa is such a distributed computer network and depends on the honesty of the nodes (shard and DS) to reach consensus and to continuously update the state with the latest block. If pBFT is a new term for you I can highly recommend the Blockonomi article.
 
The idea of pBFT was introduced in 1999 - one of the authors even won a Turing award for it - and it is well researched and applied in various blockchains and distributed systems nowadays. If you want more advanced information than the Blockonomi link provides click here. And if you’re in between Blockonomi and University of Singapore read the Zilliqa Design Story Part 2 dating from October 2017.
Quoting from the Zilliqa tech whitepaper: “pBFT relies upon a correct leader (which is randomly selected) to begin each phase and proceed when the sufficient majority exists. In case the leader is byzantine it can stall the entire consensus protocol. To address this challenge, pBFT offers a view change protocol to replace the byzantine leader with another one.”
 
pBFT can tolerate ⅓ of the nodes being dishonest (offline counts as Byzantine = dishonest) and the consensus protocol will function without stalling or hiccups. Once there are more than ⅓ of dishonest nodes but no more than ⅔ the network will be stalled and a view change will be triggered to elect a new DS leader. Only when more than ⅔ of the nodes are dishonest (>66%) double spend attacks become possible.
 
If the network stalls no transactions can be processed and one has to wait until a new honest leader has been elected. When the mainnet was just launched and in its early phases, view changes happened regularly. As of today the last stalling of the network - and view change being triggered - was at the end of October 2019.
 
Another benefit of using pBFT for consensus besides low energy is the immediate finality it provides. Once your transaction is included in a block and the block is added to the chain it’s done. Lastly, take a look at this article where three types of finality are being defined: probabilistic, absolute and economic finality. Zilliqa falls under the absolute finality (just like Tendermint for example). Although lengthy already we skipped through some of the inner workings from Zilliqa’s consensus: read the Zilliqa Design Story Part 3 and you will be close to having a complete picture on it. Enough about PoW, sybil resistance mechanism, pBFT etc. Another thing we haven’t looked at yet is the amount of decentralisation.
 
Decentralisation
 
Currently there are four shards, each one of them consisting of 600 nodes. 1 shard with 600 so called DS nodes (Directory Service - they need to achieve a higher difficulty than shard nodes) and 1800 shard nodes of which 250 are shard guards (centralised nodes controlled by the team). The amount of shard guards has been steadily declining from 1200 in January 2019 to 250 as of May 2020. On the Viewblock statistics you can see that many of the nodes are being located in the US but those are only the (CPU parts of the) shard nodes who perform pBFT. There is no data from where the PoW sources are coming. And when the Zilliqa blockchain starts reaching their transaction capacity limit, a network upgrade needs to be executed to lift the current cap of maximum 2400 nodes to allow more nodes and formation of more shards which will allow to network to keep on scaling according to demand.
Besides shard nodes there are also seed nodes. The main role of seed nodes is to serve as direct access points (for end users and clients) to the core Zilliqa network that validates transactions. Seed nodes consolidate transaction requests and forward these to the lookup nodes (another type of nodes) for distribution to the shards in the network. Seed nodes also maintain the entire transaction history and the global state of the blockchain which is needed to provide services such as block explorers. Seed nodes in the Zilliqa network are comparable to Infura on Ethereum.
 
The seed nodes were first only operated by Zilliqa themselves, exchanges and Viewblock. Operators of seed nodes like exchanges had no incentive to open them for the greater public.They were centralised at first. Decentralisation at the seed nodes level has been steadily rolled out since March 2020 ( Zilliqa Improvement Proposal 3 ). Currently the amount of seed nodes is being increased, they are public facing and at the same time PoS is applied to incentivize seed node operators and make it possible for ZIL holders to stake and earn passive yields. Important distinction: seed nodes are not involved with consensus! That is still PoW as entry ticket and pBFT for the actual consensus.
 
5% of the block rewards are being assigned to seed nodes (from the beginning in 2019) and those are being used to pay out ZIL stakers.The 5% block rewards with an annual yield of 10.03% translates to roughly 610 MM ZILs in total that can be staked. Exchanges use the custodial variant of staking and wallets like Moonlet will use the non custodial version (starting in Q3 2020). Staking is being done by sending ZILs to a smart contract created by Zilliqa and audited by Quantstamp.
 
With a high amount of DS & shard nodes and seed nodes becoming more decentralised too, Zilliqa qualifies for the label of decentralised in my opinion.
 
Smart contracts
 
Let me start by saying I’m not a developer and my programming skills are quite limited. So I‘m taking the ELI5 route (maybe 12) but if you are familiar with Javascript, Solidity or specifically OCaml please head straight to Scilla - read the docs to get a good initial grasp of how Zilliqa’s smart contract language Scilla works and if you ask yourself “why another programming language?” check this article. And if you want to play around with some sample contracts in an IDE click here. Faucet can be found here. And more information on architecture, dapp development and API can be found on the Developer Portal.
If you are more into listening and watching: check this recent webinar explaining Zilliqa and Scilla. Link is time stamped so you’ll start right away with a platform introduction, R&D roadmap 2020 and afterwards a proper Scilla introduction.
 
Generalised: programming languages can be divided into being ‘object oriented’ or ‘functional’. Here is an ELI5 given by software development academy: > “all programmes have two basic components, data – what the programme knows – and behaviour – what the programme can do with that data. So object-oriented programming states that combining data and related behaviours in one place, is called “object”, which makes it easier to understand how a particular program works. On the other hand, functional programming argues that data and behaviour are different things and should be separated to ensure their clarity.”
 
Scilla is on the functional side and shares similarities with OCaml: > OCaml is a general purpose programming language with an emphasis on expressiveness and safety. It has an advanced type system that helps catch your mistakes without getting in your way. It's used in environments where a single mistake can cost millions and speed matters, is supported by an active community, and has a rich set of libraries and development tools. For all its power, OCaml is also pretty simple, which is one reason it's often used as a teaching language.
 
Scilla is blockchain agnostic, can be implemented onto other blockchains as well, is recognised by academics and won a so called Distinguished Artifact Award award at the end of last year.
 
One of the reasons why the Zilliqa team decided to create their own programming language focused on preventing smart contract vulnerabilities safety is that adding logic on a blockchain, programming, means that you cannot afford to make mistakes. Otherwise it could cost you. It’s all great and fun blockchains being immutable but updating your code because you found a bug isn’t the same as with a regular web application for example. And with smart contracts it inherently involves cryptocurrencies in some form thus value.
 
Another difference with programming languages on a blockchain is gas. Every transaction you do on a smart contract platform like Zilliqa for Ethereum costs gas. With gas you basically pay for computational costs. Sending a ZIL from address A to address B costs 0.001 ZIL currently. Smart contracts are more complex, often involve various functions and require more gas (if gas is a new concept click here ).
 
So with Scilla, similar to Solidity, you need to make sure that “every function in your smart contract will run as expected without hitting gas limits. An improper resource analysis may lead to situations where funds may get stuck simply because a part of the smart contract code cannot be executed due to gas limits. Such constraints are not present in traditional software systems”. Scilla design story part 1
 
Some examples of smart contract issues you’d want to avoid are: leaking funds, ‘unexpected changes to critical state variables’ (example: someone other than you setting his or her address as the owner of the smart contract after creation) or simply killing a contract.
 
Scilla also allows for formal verification. Wikipedia to the rescue:
In the context of hardware and software systems, formal verification is the act of proving or disproving the correctness of intended algorithms underlying a system with respect to a certain formal specification or property, using formal methods of mathematics.
 
Formal verification can be helpful in proving the correctness of systems such as: cryptographic protocols, combinational circuits, digital circuits with internal memory, and software expressed as source code.
 
Scilla is being developed hand-in-hand with formalization of its semantics and its embedding into the Coq proof assistant — a state-of-the art tool for mechanized proofs about properties of programs.”
 
Simply put, with Scilla and accompanying tooling developers can be mathematically sure and proof that the smart contract they’ve written does what he or she intends it to do.
 
Smart contract on a sharded environment and state sharding
 
There is one more topic I’d like to touch on: smart contract execution in a sharded environment (and what is the effect of state sharding). This is a complex topic. I’m not able to explain it any easier than what is posted here. But I will try to compress the post into something easy to digest.
 
Earlier on we have established that Zilliqa can process transactions in parallel due to network sharding. This is where the linear scalability comes from. We can define simple transactions: a transaction from address A to B (Category 1), a transaction where a user interacts with one smart contract (Category 2) and the most complex ones where triggering a transaction results in multiple smart contracts being involved (Category 3). The shards are able to process transactions on their own without interference of the other shards. With Category 1 transactions that is doable, with Category 2 transactions sometimes if that address is in the same shard as the smart contract but with Category 3 you definitely need communication between the shards. Solving that requires to make a set of communication rules the protocol needs to follow in order to process all transactions in a generalised fashion.
 
And this is where the downsides of state sharding comes in currently. All shards in Zilliqa have access to the complete state. Yes the state size (0.1 GB at the moment) grows and all of the nodes need to store it but it also means that they don’t need to shop around for information available on other shards. Requiring more communication and adding more complexity. Computer science knowledge and/or developer knowledge required links if you want to dig further: Scilla - language grammar Scilla - Foundations for Verifiable Decentralised Computations on a Blockchain Gas Accounting NUS x Zilliqa: Smart contract language workshop
 
Easier to follow links on programming Scilla https://learnscilla.com/home Ivan on Tech
 
Roadmap / Zilliqa 2.0
 
There is no strict defined roadmap but here are topics being worked on. And via the Zilliqa website there is also more information on the projects they are working on.
 
Business & Partnerships  
It’s not only technology in which Zilliqa seems to be excelling as their ecosystem has been expanding and starting to grow rapidly. The project is on a mission to provide OpenFinance (OpFi) to the world and Singapore is the right place to be due to its progressive regulations and futuristic thinking. Singapore has taken a proactive approach towards cryptocurrencies by introducing the Payment Services Act 2019 (PS Act). Among other things, the PS Act will regulate intermediaries dealing with certain cryptocurrencies, with a particular focus on consumer protection and anti-money laundering. It will also provide a stable regulatory licensing and operating framework for cryptocurrency entities, effectively covering all crypto businesses and exchanges based in Singapore. According to PWC 82% of the surveyed executives in Singapore reported blockchain initiatives underway and 13% of them have already brought the initiatives live to the market. There is also an increasing list of organisations that are starting to provide digital payment services. Moreover, Singaporean blockchain developers Building Cities Beyond has recently created an innovation $15 million grant to encourage development on its ecosystem. This all suggest that Singapore tries to position itself as (one of) the leading blockchain hubs in the world.
 
Zilliqa seems to already taking advantage of this and recently helped launch Hg Exchange on their platform, together with financial institutions PhillipCapital, PrimePartners and Fundnel. Hg Exchange, which is now approved by the Monetary Authority of Singapore (MAS), uses smart contracts to represent digital assets. Through Hg Exchange financial institutions worldwide can use Zilliqa's safe-by-design smart contracts to enable the trading of private equities. For example, think of companies such as Grab, AirBnB, SpaceX that are not available for public trading right now. Hg Exchange will allow investors to buy shares of private companies & unicorns and capture their value before an IPO. Anquan, the main company behind Zilliqa, has also recently announced that they became a partner and shareholder in TEN31 Bank, which is a fully regulated bank allowing for tokenization of assets and is aiming to bridge the gap between conventional banking and the blockchain world. If STOs, the tokenization of assets, and equity trading will continue to increase, then Zilliqa’s public blockchain would be the ideal candidate due to its strategic positioning, partnerships, regulatory compliance and the technology that is being built on top of it.
 
What is also very encouraging is their focus on banking the un(der)banked. They are launching a stablecoin basket starting with XSGD. As many of you know, stablecoins are currently mostly used for trading. However, Zilliqa is actively trying to broaden the use case of stablecoins. I recommend everybody to read this text that Amrit Kumar wrote (one of the co-founders). These stablecoins will be integrated in the traditional markets and bridge the gap between the crypto world and the traditional world. This could potentially revolutionize and legitimise the crypto space if retailers and companies will for example start to use stablecoins for payments or remittances, instead of it solely being used for trading.
 
Zilliqa also released their DeFi strategic roadmap (dating November 2019) which seems to be aligning well with their OpFi strategy. A non-custodial DEX is coming to Zilliqa made by Switcheo which allows cross-chain trading (atomic swaps) between ETH, EOS and ZIL based tokens. They also signed a Memorandum of Understanding for a (soon to be announced) USD stablecoin. And as Zilliqa is all about regulations and being compliant, I’m speculating on it to be a regulated USD stablecoin. Furthermore, XSGD is already created and visible on block explorer and XIDR (Indonesian Stablecoin) is also coming soon via StraitsX. Here also an overview of the Tech Stack for Financial Applications from September 2019. Further quoting Amrit Kumar on this:
 
There are two basic building blocks in DeFi/OpFi though: 1) stablecoins as you need a non-volatile currency to get access to this market and 2) a dex to be able to trade all these financial assets. The rest are build on top of these blocks.
 
So far, together with our partners and community, we have worked on developing these building blocks with XSGD as a stablecoin. We are working on bringing a USD-backed stablecoin as well. We will soon have a decentralised exchange developed by Switcheo. And with HGX going live, we are also venturing into the tokenization space. More to come in the future.”*
 
Additionally, they also have this ZILHive initiative that injects capital into projects. There have been already 6 waves of various teams working on infrastructure, innovation and research, and they are not from ASEAN or Singapore only but global: see Grantees breakdown by country. Over 60 project teams from over 20 countries have contributed to Zilliqa's ecosystem. This includes individuals and teams developing wallets, explorers, developer toolkits, smart contract testing frameworks, dapps, etc. As some of you may know, Unstoppable Domains (UD) blew up when they launched on Zilliqa. UD aims to replace cryptocurrency addresses with a human readable name and allows for uncensorable websites. Zilliqa will probably be the only one able to handle all these transactions onchain due to ability to scale and its resulting low fees which is why the UD team launched this on Zilliqa in the first place. Furthermore, Zilliqa also has a strong emphasis on security, compliance, and privacy, which is why they partnered with companies like Elliptic, ChainSecurity (part of PwC Switzerland), and Incognito. Their sister company Aqilliz (Zilliqa spelled backwards) focuses on revolutionizing the digital advertising space and is doing interesting things like using Zilliqa to track outdoor digital ads with companies like Foodpanda.
 
Zilliqa is listed on nearly all major exchanges, having several different fiat-gateways and recently have been added to Binance’s margin trading and futures trading with really good volume. They also have a very impressive team with good credentials and experience. They dont just have “tech people”. They have a mix of tech people, business people, marketeers, scientists, and more. Naturally, it's good to have a mix of people with different skill sets if you work in the crypto space.
 
Marketing & Community
 
Zilliqa has a very strong community. If you just follow their Twitter their engagement is much higher for a coin that has approximately 80k followers. They also have been ‘coin of the day’ by LunarCrush many times. LunarCrush tracks real-time cryptocurrency value and social data. According to their data it seems Zilliqa has a more fundamental and deeper understanding of marketing and community engagement than almost all other coins. While almost all coins have been a bit frozen in the last months, Zilliqa seems to be on its own bull run. It was somewhere in the 100s a few months ago and is currently ranked #46 on CoinGecko. Their official Telegram also has over 20k people and is very active, and their community channel which is over 7k now is more active and larger than many other official channels. Their local communities) also seem to be growing.
 
Moreover, their community started ‘Zillacracy’ together with the Zilliqa core team ( see www.zillacracy.com ). It’s a community run initiative where people from all over the world are now helping with marketing and development on Zilliqa. Since its launch in February 2020 they have been doing a lot and will also run their own non custodial seed node for staking. This seed node will also allow them to start generating revenue for them to become a self sustaining entity that could potentially scale up to become a decentralized company working in parallel with the Zilliqa core team. Comparing it to all the other smart contract platforms (e.g. Cardano, EOS, Tezos etc.) they don't seem to have started a similar initiatives (correct me if I’m wrong though). This suggest in my opinion that these other smart contract platforms do not fully understand how to utilize the ‘power of the community’. This is something you cannot ‘buy with money’ and gives many projects in the space a disadvantage.
 
Zilliqa also released two social products called SocialPay and Zeeves. SocialPay allows users to earn ZILs while tweeting with a specific hashtag. They have recently used it in partnership with the Singapore Red Cross for a marketing campaign after their initial pilot program. It seems like a very valuable social product with a good use case. I can see a lot of traditional companies entering the space through this product, which they seem to suggest will happen. Tokenizing hashtags with smart contracts to get network effect is a very smart and innovative idea.
 
Regarding Zeeves, this is a tipping bot for Telegram. They already have 1000s of signups and they plan to keep upgrading it for more and more people to use it (e.g. they recently have added a quiz features). They also use it during AMAs to reward people in real time. It’s a very smart approach to grow their communities and get familiar with ZIL. I can see this becoming very big on Telegram. This tool suggests, again, that the Zilliqa team has a deeper understanding what the crypto space and community needs and is good at finding the right innovative tools to grow and scale.
 
To be honest, I haven’t covered everything (i’m also reaching the character limited haha). So many updates happening lately that it's hard to keep up, such as the International Monetary Fund mentioning Zilliqa in their report, custodial and non-custodial Staking, Binance Margin, Futures & Widget, entering the Indian market, and more. The Head of Marketing Colin Miles has also released this as an overview of what is coming next. And last but not least, Vitalik Buterin has been mentioning Zilliqa lately acknowledging Zilliqa and mentioning that both projects have a lot of room to grow. There is much more info of course and a good part of it has been served to you on a silver platter. I invite you to continue researching by yourself :-) And if you have any comments or questions please post here!
submitted by haveyouheardaboutit to CryptoCurrency [link] [comments]

Blockchain in Healthcare: Bridging Trust in response to COVID-19

Blockchain in Healthcare: Bridging Trust in response to COVID-19
Link to our article: https://block.co/blockchain-in-healthcare/
There’s never been a better time to provide proof-of-health solutions in the healthcare system globally. While it’s difficult to comprehend the significance of the role that technology may offer in such difficult times, essentially it can be nailed down to its basic concept of simplifying work and coordinating activities, which could have helped avoid the worst crisis people have experienced in their lifetime. If the healthcare system would adopt technological innovations in the early stages, it could have benefited and saved many lives.
Although the healthcare system has traditionally been slow in embracing the latest digital solutions, just like many other industries, we’ve observed in a previous article how the Covid-19 crisis has accelerated the adoption of digital technologies on a global scale in several industries, including healthcare.
The latest webcast brought to the audience by Block.co hosted some high profile experts from the industry. They illustrated how blockchain especially, together with other technologies such as IoT, and AI could in the future help elevate prompt responses, and provide more secure and efficient storage of data, something that has been missed in the recent pandemic.
Ahmed Abdulla from Digipharm, Dr. Alice Loveys from EY, and Dimitrios Neocleous from VeChain were hosted by Georgina Kyriakoudes, one of the first in the world to hold an MSc in Digital Currency, founder of Dcentric.Health and creator of the permissioned blockchain ecosystem app called Aria, which aims to transform the patient healthcare experience by giving individuals full control of their medical records.
Blockchain’s benefits in healthcare are primarily identified by efficiency, specifically on the transfer of data, facilitation of goods transport via the supply chain, prevention of counterfeit medicines sale, secure storage, and exchange of data around ID management. The impressive projects all the webcast guests have developed in the industry enable just these features, from the digitization of patient records to storage and exchange of medical data as well as easier processing of funds.
https://preview.redd.it/7k85objjz1851.png?width=768&format=png&auto=webp&s=237293e731024ae8f50861682c434b04d7742e05
Ahmed Abdulla founded Digipharm with the idea of issuing tokens to allow patients to be in control of their medical records at all times. Moreover, tokens are issued to be paid for anonymously sharing personal medical data to help research; pay for healthcare based on how it has improved quality of life.
We have experienced a disparity in Covid-19 tests costs around the world. For instance, getting tested in Cyprus costs around €60 while in the US it may add up to a few thousand dollars. This is due to the way countries arrange payment setups from payers to providers. Blockchain empowers people to take ownership of their records and funds while providing transparency of processes. This is where blockchain can be robust, by increasing transparency and allowing the patient to secure money transfer and hold their own records”, stated Ahmed.
His work as blockchain advisor at the UN Economic Commission for Europe is helping set up standards for the blockchain ecosystem, namely how the system should be used safely, and in a way that benefits all stakeholders.
“I lead the blockchain and healthcare team at the UN center for trade facilitation and e-business where we developed a blockchain and trade facilitation white paper; the second phase will soon provide an advanced technology advisory board to advise private or public stakeholders on what’s the best technology to use. It might not always be blockchain, hence we first understand and then advise if the tech is right for them or not. Blockchain is clunky, expensive, and not always proper for the organization we work with”, continued the blockchain expert.
Most people may prefer public and permissionless blockchain because it has major advantages over a private and permissioned one. Transparency stands out for the way the ledger is shared and for due diligence becoming unnecessary as a result. This means costs are also cheaper, in the range of 100% lower. On the other hand, a public decentralized blockchain has a major disadvantage since no legal framework is laid out. This means uncertainty as there is still a grey area in the legal field that might create confusion.
Dimitrios Neocleous is Ecosystem Manager at VeChain Tech and directly supported digital and technological solutions provider I-DANTE with the creation of the E-NewHealthLife and the E-HCert for the Mediterranean Hospital of Cyprus. Both apps give patients control over their health records, improve medical data sharing, and increase hospital operational efficiencies by simplifying the process of visiting a hospital.
E-NewHealthLife is a complex ecosystem solution that starts from a patient’s visit to an emergency room. A card with the reason for a patient’s visit is issued; it gets time-stamped; the patient is sent to the waiting room; once the patient’s turn comes and the medical check is completed, the card is scanned and the visit is closed. Patients can digitally access all diagnoses that took place anytime at the hospital.
“The platform produces a digital health passport, which is an encrypted non-fungible card that patients can use to identify themselves automatically when registering at the hospital’s emergency room. The passport is stored within a mobile app called E-HCert, which keeps track of each patient’s medical data and can be shared as needed”, announced Dimitrios.
E-HCert App is a Covid-19 lab test electronic wallet and pushes up the results of a patient who’s been tested for COVID. It has been proven to be very successful so far; currently, 2000 people who transited through the Larnaca airport in Cyprus have downloaded the app. With time-stamped records, it’s able to provide data such as the day and time when the sample was collected, it offers immutability, security, and integrity of data.
https://preview.redd.it/kqq7jfgpz1851.png?width=940&format=png&auto=webp&s=2c9a121e0a4839125418db7ff61ae3957c3fff41
“Covid-19 showed a deficiency in healthcare. The spread of the virus could have been prevented if we had digitization of processes and transparency of data through blockchain, and transfer of data through an authorized share of records. An open permissionless decentralized blockchain helps bring ownership of medical records back to the patient, and that is not possible in a centralized system”, continued the VeChain representative.
Dr. Alice Loveys is EY ‘s healthcare blockchain leader in the US and has been at the forefront of emerging healthcare technologies for her entire career including being a pioneer in electronic health record adoption, health information exchange, and privacy and security.
She believes that “blockchain technology is like a plumbing system that brings clean and transparent trusted data that can be used. It’s not proper for a track and trace system as it invades privacy unless there is the consent from patients, in that case, blockchain transparent share of data would be extremely useful for medical research and testing”.
One problem we experienced during the crisis is the confusion that arose with divulged information and the frustration that comes with it. People do not understand anymore which information can be trusted; at first, it looked like COVID-19 symptoms were not dangerous, then it came out that they actually were. Masks were not useful at the beginning, then they suddenly became necessary.
“Blockchain could have prevented lockdown and economic crisis through data management in that a much faster response would have been provided to tackle misinformation because blockchain can help manage data from different sources”, continues Dr. Loveys. “Moreover, it’s a great way to protect the database. Instead of moving any private sensitive medical data through the more traditional digital systems, blockchain simply allows us to send an algorithm, encrypted data that safeguards the information. It’s not a great use as a database as it does not scale, therefore we would not be able to store information for billions of people in it. But for the data that is in the blockchain, using algorithms, makes it very convenient and secure”.
Another topic discussed during the webcast was the GDPR compliance for blockchain. GDPR (General Data Protection Regulation) was created before blockchain therefore it doesn’t account for decentralized technologies. Generally speaking, it all comes down to how the technology is used and what kind of data is incorporated in it. Timestamping data without invading anyone’s privacy, or timestamp of consented data, should determine no issue at all. This is what privacy by design stands for, taking human values into account in a well-defined manner throughout the whole process.
Block.co, powered by the University of Nicosia, is establishing itself as a global leader in the issuance of digital immutable and secure certificates timestamped on the Bitcoin blockchain. In the field of healthcare, it could include medical records, prescription issuance, insurance disputes, supply chain documentation, and any type of verifiable certificate that requires authenticity at its core.
For more info, contact Block.co directly or email at [[email protected]](mailto:[email protected]).
Tel +357 70007828
Get the latest from Block.co, like and follow us on social media:
✔️Facebook
✔️LinkedIn
✔️Twitter
✔️YouTube
✔️Medium
✔️Instagram
✔️Telegram
✔️Reddit
✔️GitHub
submitted by BlockDotCo to u/BlockDotCo [link] [comments]

Does Privacy Coin will be mainstream in the 2020’s?

Does Privacy Coin will be mainstream in the 2020’s?

https://preview.redd.it/dtecp9rwixu41.jpg?width=4840&format=pjpg&auto=webp&s=73fb2ff0135241cd7fe4fddd993f01a27c2a38c7
Since the introduction of bitcoin, thousands of other cryptocurrencies have been brought to the market. Dozens of these are considered “Privacy Coins” because they use advanced and intentional methods to protect the privacy of their users further. They go over and above the security features used within the Bitcoin Network.
However, Bitcoin is not a privacy coin
From the beginning, the creator(s) of bitcoin intended it to be a privacy coin to keep user information protected. But because of the open ledger technology used in cryptocurrencies, tracking transactional data could and still can be relatively easy. For example, when someone wants to spy and track transactions, they may set up spy nodes that attempt to triangulate data.
https://preview.redd.it/m0d71wc2jxu41.jpg?width=740&format=pjpg&auto=webp&s=24f6266299c0f09e88042bdb30e2d84048979a77
Despite identifying wallets via alphanumeric (consisting of or using both letters and numerals) codes rather than real names, bitcoin isn’t anonymous. Because the blockchain keeps an immutable record of every single fraction of bitcoin moved in and out of these wallets, it’s surprisingly easy to trace the flow of bitcoin from one wallet to another.
Transactional data on ledgers like the Bitcoin Blockchain is open and public. It means they show the date, amount, and receiving and sending wallet addresses. Anyone using the network can see this information. If a crypto user wants additional layers of privacy, they can go to extra lengths to get them. Adding privacy is possible in a variety of ways, including the use of a Privacy Coin.
A recent report from the Massachusetts Institute of Technology (MIT) confirms the need for privacy for a digital monetary system.
It’s precisely for this reason that a new breed of cryptocurrencies — privacy coins — have been emerging since 2014. As the name implies, these aim to offer greater anonymity than the likes of bitcoin and ethereum. It’s becoming apparent that privacy-coin features will be vital if cryptocurrencies are to be widely adopted in the future.
There are at least 30 privacy coins, with most of them aiming for privacy through a variety of different measures.
https://preview.redd.it/wrut0gb6jxu41.jpg?width=1600&format=pjpg&auto=webp&s=0a07a945d6cccde6f112bb531b5a6c97f3001353
Monero(XMR): Two methods to conceal identities
The most well known is Monero (XMR), which was launched in April 2014 and which uses two methods to conceal identities: confidential ring transactions (RingCTs) and stealth addresses.
Simply put, the use of RingCTs allows the Monero blockchain to verify transactions without revealing how much was transacted and who transacting parties are. As for stealth addresses, these involve a recipient of an XMR payment receiving her new funds at a one-time, randomly generated ‘stealth’ address, which isn’t linked to her usual account.
However, Monero’s privacy algorithm has a potential vulnerability that makes it possible for researchers to be able to trace around 80% of Monero transactions, recent paper states.
https://preview.redd.it/4mvghtw8jxu41.png?width=1920&format=png&auto=webp&s=46a11f249028492d45fa64822c097b0cff865a5c
Verge(XVG): Anonymises users via the Tor network
Another popular privacy coin that uses a different approach to anonymity but nonetheless encounters comparable problems is Verge (XVG). It anonymizes users by hiding their IP addresses via the Tor network.
The problem is, while this makes linking a particular wallet to a real-world identity more complicated, the fact that the blockchain and its transactions remain transparent still permits wallets to be identified — and valued — via careful detective work.
https://preview.redd.it/6g70z3tajxu41.png?width=1270&format=png&auto=webp&s=1e892c10ee3cfaf2dae682f1f09c8c6f46aebebe
Celare: First full-asset cross-chain and anonymous solution
Such features of privacy coins will be of paramount importance if any cryptocurrencies are to be used as currency on a mass scale. Even though some of the above coins have certain weak spots, they’re continuously improved, while newer privacy coins (e.g., Celare) are emerging all the time. And far from being an attempt by developers to make crypto even ‘shadier’ than it’s sometimes perceived to be, privacy coins are, on the contrary, another critical step in bringing crypto a bit closer to the mainstream.
Fungibility is something that other privacy coins strive for, but with mixed results. Celare achieves privacy via a process known as “zk-SNARK” (zero-knowledge, Succinct Non-Interactive Argument of Knowledge). Similar to RingCTs, this proves that a transaction is valid without recording any other information about it (such as amounts and addresses).
Celare, a parallel chain of smart privacy contracts in the Polkadot ecosystem, is developed based on Substrate. By selecting the BLS12–381 curve to achieve zero-knowledge proof, Celare indeed implements the blockchain system with the privacy protection of Turing-complete smart contracts.
It bridges the connectivity between different projects and ensures the privacy of the project and assets safety, better to create ecological consensus.
Compared with the existing Blockchain privacy protection technology, Celare not only realizes the privacy protection of account information and transaction but also recognizes the cross-chain ecosystem.
It is a secure, anonymous channel that breaks the Internet blockade and does not require a VPN, to protect user privacy and security for the entire Celare ecosystem.
The so-called anonymity is not only the authentication without personal identity information, but also the hidden high-anonymity Celare of the communication channel uses distributed nodes to support the entire network operation.
Not only that, in the process of using covert chat, but no third party stores the message content, and the chat content will also be stored in the local file. The master node is only responsible for providing network transmission and content delivery.
Based on anonymous peer-to-peer chat, Celare users and groups in the community can independently launch OTC (over-the-counter transaction).
Celare will be evolved and absorbed in the Celare development process, to realize plenty of the stack ecology applications, such as Parity Substrate, Wasm, DAO, Treasury.
https://preview.redd.it/fd02yiidjxu41.jpg?width=1000&format=pjpg&auto=webp&s=2de0ba384f7a4d3f38f9d6da5ade8000ef979e4b
Brian Armstrong, the CEO of Coinbase, has stated in a recent blog post that there will be a need for privacy features on blockchains in this decade.
According to him, this is besides scalability the most crucial aspect for the coming years to achieve widespread acceptance. Armstrong predicts that blockchains “will reach about 1 billion users by the end of the decade”.
The Bitcoin Network is continuously developing and implementing additional privacy layers to deal with the challenges of open ledgers. The only sure thing is that in the next few years, the privacy coin realm will be fascinating.
Join Us at Celare Community today to stay up to date with all the latest crypto happenings and news.
Contact Us:
Twitter: @CelareCommunity
Telegram:t.me/celarecommunity_en
Reddit:u/Celarecommunity
GitHub:Celaregithub
submitted by Celarecommunity to u/Celarecommunity [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

r/Bitcoin recap - July 2019

Hi Bitcoiners!
I’m back with the 31st monthly Bitcoin news recap.
For those unfamiliar, each day I pick out the most popularelevant/interesting stories in Bitcoin and save them. At the end of the month I release them in one batch, to give you a quick (but not necessarily the best) overview of what happened in bitcoin over the past month.
You can see recaps of the previous months on Bitcoinsnippets.com
A recap of Bitcoin in July 2019
Adoption
Development
Security
Mining
Business
Education
Regulation & Politics
Archeology (Financial Incumbents)
Price & Trading
Fun & Other
submitted by SamWouters to Bitcoin [link] [comments]

PCHAIN & Gate.io AMA Summary

PCHAIN & Gate.io AMA Summary

https://preview.redd.it/tpke0a4ckmk41.jpg?width=1400&format=pjpg&auto=webp&s=6f48550202be5ec32428a0edf5214954dcd345cc
Glad to have a great AMA with Gate.io on Feb.13th, 2020. Read patiently and you will get more known about PCHAIN and the future of PCHAIN.
For the AMA in Chinese, welcome to visit: https://www.gate.io/help/livetext/17312
Gate.io: Very happy to invite Dr. Jeff, founder of PCHAIN as our guest today!
Dr Jeff: I am very happy to receive an exclusive interview with Gate.io to share and exchange some things about the development of PCHAIN ​​with you.
Gate.io: Dr Jeff, you were engaged in Internet finance in 2017. Why did you want to do PCHAIN ​​as a public chain?
Dr Jeff: The development path of the Internet is that applications are king. You can see that many good Internet companies are doing applications. The blockchain is the next generation Internet. At that time, considering applications was a very good place to stay, and the best direction. It is the financial sector. At the time, I was the chief scientist of Internet finance at IBM and the head of the blockchain. At the time of 2015 and 2016, Ethereum was also very early. But after completing the application discovery, I found that the underlying technology is not enough. All applications need a good public chain as the basic support. It is in line with the stable development law and it is gradual, so I decided to do this underlying building block. In addition, many functions of Ethereum have been criticized, such as performance. Many public chains 2.0 and 3.0 have emerged to solve the performance problem-TPS, and we have also made many innovations. From TPS, interoperability, cross-chain to application direction by 2020, changes are very fast. Of course, we have also achieved very good results on TPS: Under the 1064 intercontinental (Asia, Europe, America) node environment, it can support 256 childchains to produce blocks in parallel and interoperate with the main chain without issue. The test network measured 126,000 TPS, theoretical TPS is 180,000 TPS, and can be infinitely expanded horizontally. This is not difficult from a technical perspective in the local area network, but it is difficult to achieve it in a transcontinental environment. This is a very good foundation, and we will develop applications in the future.
Gate.io: Users ask: How do you think of the progress made in PCHAIN ​​and how do you think of Private CCC?
Dr Jeff: This is what I want to talk about in this AMA. One direction is DeFi, including Staking. In addition to these two directions, more opportunities from the applications in the industry. In terms of industry opportunities, we have a pioneering layout, which is to propose a new concept: commercial childchain, Private CCC. Because the domestic regulatory environment is difficult to achieve large-scale direct public chain applications in China, everyone expects the form of alliance chains. However, the alliance chain has limited imagination space, produces results in a small scope, and the communication link between the alliance chain and the public chain does not exist. It is equivalent to setting up many small local area networks, but now everyone is directly connected to the Internet. We did a multi-chain commercial childchain architecture at the time, including 256 childchains in parallel worldwide, also to verify the scalability and technical stability of this architecture. A question of mutual trust. How to trust it? Through the interaction between the main chain and the childchain, the information on the childchain is continuously updated to the main chain. When an alliance chain wants to know the information of its alliance chain, it can fully trust the information recorded on the main chain in history. This will surely link everyone together and is in line with China’s policies. This is a very important logic that we propose for the commercial childchain. It is a consideration and design oriented to supervision and future-oriented.
Gate.io: When did PCHAIN ​​start?
Dr Jeff: The white paper was released at the end of March 2018, and the mainnet was launched on March 30, 2019. In less than a year, the main chain has generated more than 10 million blocks. Let’s take a specific example: Ethereum launched the mainnet in July 2015. Until this year, about 5 years already, the total block is 9 million.
Gate.io: Will it produce invalid information accumulation?
Dr Jeff: Yes, but there is a follow-up solution, which is SmartData-Intelligent Data Processing, which was released last year. It is scored on this framework. It is different from the simplest highest TPS. In the past, many blocks will be empty. Redundancy is even worthless, which will put a lot of pressure on the node disk. After the release of SmartData reduction, it successfully compressed 200G to 20G, which is almost 10 times compression. In theory, mobile phones can run on it. But because of some bandwidth requirements, the subsequent continuous evolution process, the ultimate goal is to make the nodes lighter and lighter and let more nodes access.
Gate.io: We are also mining at Pos nodes. Staking is hot in 2019, what do you think of Staking?
Dr Jeff: Halved, burning is also very hot this year. Why is burning important? I think it is related to Staking. Staking is naturally an inflation. There will be more and more tokens. Only burning will make the value continuously increase.
Gate.io: How did you consider this piece of PCHAIN?
Dr Jeff: We have such a mechanism for planning POS in the white paper, and we have always believed that it is leading the technology development trend in the industry. People who have read the PCHAIN ​​white paper will understand that PCHAIN ​​is also a halved token. Like Bitcoin, our mechanism is also halved in 4 years. This year is the second year. Second, the total amount is constant. How much Ethereum will issue on the original basis each year, and the newly mined Token on PCHAIN ​​is limited to 15% of pos. If it cannot be mined already, the owner on the childchain can go to the market to buy Token and inject it into the childchain, so that the miners of the childchain have the motivation to continue mining. This is different from Bitcoin and Ethereum.
Gate.io: Users ask: When will the commercial childchain start?
Dr Jeff: First quarter. The most important part of the year 2020 plan is the commercial childchain. The commercial childchain project in the first quarter must be confirmed. Although the impact of the new coronavirus, we are still very confident and communication has been ongoing.
Gate.io: How many commercial childchains are expected to be in PCHAIN ​​this year?
Dr Jeff: It’s hard to predict, but I can tell you that there are three childchains moving forward. Recently, there have been successive partners and domestic top software developers communicating. Because of the high incidence of blockchain applications this year, if they cooperate with large-scale software development, there may be a relatively explosive momentum.
Gate.io: What do you think of Staking?
Dr Jeff: Many of us still think from a technical point of view. POW has been for many years. The disadvantages of power consumption have been around for a long time, but the degree of decentralization is high. The future trend must be the large-scale application of the blockchain. This is a trend, and efficiency is very important. All projects are talking about POS. Staking is a derivative of the consensus mechanism. Only by holding the token in it will we focus on its security . Many early projects also exposed a lot of problems, which gradually reduced by half.
Gate.io: What are the shortcomings in the development process that need to be improved?
Dr Jeff: The shortcomings in the market are still relatively lacking. In 2018, our focus is all overseas, so the domestic voice is relatively small. After 2019, it has been developing and strengthening in the domestic market area, so that more people recognize PCHAIN.
Gate.io: I think we have our own wallet?
Dr Jeff: Yes, the current function can be staking, and a cross-chain transfer can be performed between the main chain and the childchain. Its basic positioning is a technology-oriented wallet, and the future plan is also in terms of technology. For example, quickly put some interesting applications (especially Ethereum) on PCHAIN, which is also a relatively important function. We are compatible with EVM of Ethereum. An Ethereum application developer can put it on PCHAIN ​​with almost no code changes.
Gate.io: What other application scenarios does the blockchain have in addition to the cryptocurrency circle? How to balance speed and decentralization under safe conditions?
Dr Jeff: Impossible triangle of blockchain, security, efficiency and security, in a certain perspective, there is no solution. The fundamental problem of balance lies in whether the consensus algorithm itself is good enough. Our original new consensus algorithm is called PDBFT consensus algorithm. Last year, everyone talked more than BFT, VIF random numbers, and a BOS data compression, including the Cosmos overseas team said that BOS has been integrated, our PDBFT integrates these three factors together, let the communication volume from the square of N to N, the degree of decentralization has been improved while ensuring efficiency.
Gate.io: The current commercial childchain is Private Chain. How to connect to Public Chain?
Dr Jeff: Cross-chain. In the future, in addition to its own main chain and childchains, it can also cross other chains.
Gate.io: Why did you choose to be listed at Gate.io?
Dr Jeff: Gate.io is one of the few exchanges that is very consistent with our basic thinking and philosophy of work, including founder Mr. Han, who has been persistently committed to technology, and even we have studied technical details for several hours. We have also contacted the founders of many exchanges. There are not many people like founder Mr. Han who know every detail very well. Secondly, Gate.io has a good community foundation. I think Gate.io is also in the world TOP position, its transaction volume and non-wash trading order are very real, this is very consistent with the spiritual pursuit of the blockchain.
Gate.io: Our users ask you, how to reduce the number of communication handshake to maintain consistency? The current workload proofs are all based on Sha256. Is there any further progress?
Dr Jeff: The Sha256 workload proof belongs to POW’s consensus algorithm and belongs to an axiom proof. Based on this axiom, everyone agrees that its decentralization is very good. However, in all POS, the emphasis is on cooperative handshake, which cannot be reduced from the perspective of collaboration, but it can reduce the amount of information transmitted during the collaboration process. Example: The reduction of communication volume makes the amount of collaboration less. Through communication compression, a lot of people shaking hands at the same time also improve the efficiency.
Gate.io: If the user wants to know some information, in addition to the official website and public account, and where can I find the desired content on the domestic platform?
Dr Jeff: If you prefer technology, you can go to github to watch it. There have been 23 major and minor upgrades since the mainnet launch last year.
Gate.io: What are the main adjustments to the mainnet upgrade?
Dr Jeff: It’s mainly rewarding. It’s a small part of staking for optimization.
Gate.io: Can you talk about future plans?
Dr Jeff: In the future, the focus will be on the commercial childchain. In addition to this, SmartData will be more important. At present, it is relatively new. Like Oracle, it is also part of SmartData.
Gate.io: How many people are using the new commercial childchain?
Dr Jeff: Generally speaking, there were thousands of data on a commercial childchain last year.
Gate.io: Some of the businesses on PCHAIN ​​are private chains. How can we get to the common chain in the future?
Dr Jeff: The commercial childchain itself has such a switch, uploading a part of the hash value to the public chain, and the user can operate it if he wants to open the switch, which depends on the consensus of these enterprises participating in the alliance chain.

Dr. Jeff Cao introduction
Dr Jeff, the founder of PCHAIN, the chief scientist of the China Internet of Things blockchain, the inventor of China’s first blockchain international patent, and the co-sponsor of China Ledger. In 2016, he completed the world ’s first transfer of blockchain asset income rights. He was the head of the IBM blockchain and has published a total of 22 top international papers and more than 30 US patents. He has chaired multiple ACM IEEE top international conference forums.

You can follow PCHAIN below
Telegram 1, Telegram(Chinese Community) Telegram(Russian Community),Telegram(Spanish Community) Telegram(Germany Community), Telegram (French Community) Telegram (Vietnam Community), Telegram Announcement Channel Twitter, Steemit,RedditFoundeCEO’s Twitter
submitted by pchain_org to Pchain_Org_Official [link] [comments]

How to Send Crypto Currency from a Paper Wallet How To Extract Bitcoin From A Paper Wallet What are Bitcoin Wallet ? Ultimate Guide To Paper Wallets(Storing Cryptocurrency) MadBitcoins How to make Secure Paper Bitcoin Wallets (step by step) (PC version)

Contribute to Bitcoin-com/Wallet development by creating an account on GitHub. Contribute to Bitcoin-com/Wallet development by creating an account on GitHub. Sweeping a BCH paper wallet results in paying a fixed fee of 0.0001 BCH which is way too high. 1. What is a Bitcoin Paper Wallet? A private key (or seed phrase) is like the password for a Bitcoin wallet. It should be kept offline in what is known as Cold Storage.A private key is a long, confusing string of random characters, while a seed phrase is a set of 24 random words that allows you to restore your private key. A Bitcoin Cash (BCH) wallet is as simple as a single pairing of a Bitcoin Cash (BCH) address with its corresponding Bitcoin Cash (BCH) private key. Such a wallet has been generated for you in your web browser and is displayed above. To safeguard this wallet you must print or otherwise record the Bitcoin Cash (BCH) address and private key. It is important to make a backup copy of the private Paper Wallet Generator for Bitcoin & Altcoins. Contribute to technologiespro/paper-wallet-generator development by creating an account on GitHub. Using private browser mode, go to a bitcoin paper wallet creation site. As of July 2016, the most popular, open source paper wallet creation site is bitaddress.org and these instructions will use that site.

[index] [28068] [5577] [3581] [14359] [14339] [10132] [30047] [7912] [20034] [15196]

How to Send Crypto Currency from a Paper Wallet

- Download BitAddress.org from GitHub Mac Instructions - Create Temporary Account - System Preferences - Users ... How To Create A Bitcoin Paper Wallet - Duration: 5:54. IMineBlocks 42,342 views. Bitcoin Paper Wallet Beginners Tutorial. One of the most popular options for keeping your bitcoins safe is something called a paper wallet. I explain how to transfer all those digital coins into a ... Last video gave you insight to using the Bitcoin ATM. This one shows you how send Bitcoin from the paper wallet you received from the ATM to a mobile wallet. Coinomi to be specific. Check out the ... How to Make a Bitcoin Paper Wallet & Protect your Crypto - Duration: 10:03. Every Bit Helps 2,462 views. 10:03. Bitcoin 101 - Intro to Paper Wallets & Cold Storage ... This is a live demonstration showing how to move/send crypto-currency from a paper wallet (or just a private key) to a different address, in this case, a software wallet managed by the Exodus ...

Flag Counter