Running Bitcoin - Bitcoin Wiki

BCH Unlimited Ubuntu PPA repo updated to version 1.8.0

The BCH Unlimited Ubuntu PPA repository has been updated to serve version 1.8.0 is available at:
 
https://launchpad.net/~bitcoin-unlimited/+archive/ubuntu/bucash
 
This release is compatible the Bitcoin Cash protocol. To update already installed packages (*):
 
sudo apt update sudo apt upgrade 
 
To install
 
sudo add-apt-repository ppa:bitcoin-unlimited/bucash sudo apt-get update sudo apt install bitcoind bitcoin-qt 
 
starting from this update the repository is serving also ElectrsCash(**) v.1.1.1, for now just for the amd64 architecture. To install it just execute this command:
sudo apt install electrscash 
 
See the official announcement and the release notes for more details:
https://np.reddit.com/btc/comments/g3k4mbch_unlimited_180_has_just_been_released/
https://github.com/BitcoinUnlimited/BitcoinUnlimited/blob/release/doc/release-notes/release-notes-1.8.0.md
 
Known issues:
On Ubuntu 18.04 (bionic) you'll probably get an error while trying to install bitcoind. The error message is the following:
The following packages have unmet dependencies. bitcoind : Depends: libgcc-s1 (>= 3.4) but it is not installable E: Unable to correct problems, you have held broken packages. Package libgcc-s1 is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source 
It seems like libgcc-s1 which is a focal (ubuntu 20.04, still in beta) package that has somehow crept in the bionic "food-chain", I'm working on a fix right now. Thanks to xd1gital for the initial report.
Edit: to solve the problem please do:
sudo add-apt-repository ppa:ubuntu-toolchain-test sudo apt update sudo apt dist-upgrade sudo apt install bitcoind 
 
(*) due to fact we rebranded Ubuntua PPA name along with the name of the clients, you will be displayed with this warning and question to which you could safely reply "Yes":
E: Repository 'http://ppa.launchpad.net/bitcoin-unlimited/bucash/ubuntu bionic InRelease' changed its 'Label' value from 'BU Cash' to 'BCH Unlimited' N: This must be accepted explicitly before updates for this repository can be applied. See apt-secure(8) manpage for details. Do you want to accept these changes and continue updating from this repository? [y/N] 
  (**) ElectrsCash is an efficient re-implementation of Electrum Server written in Rust.
submitted by s1ckpig to bitcoin_unlimited [link] [comments]

BCH Unlimited Ubuntu PPA repo updated to version 1.8.0

The BCH Unlimited Ubuntu PPA repository has been updated to serve version 1.8.0 is available at:
 
https://launchpad.net/~bitcoin-unlimited/+archive/ubuntu/bucash
 
This release is compatible the Bitcoin Cash protocol. To update already installed packages (*):
 
sudo apt update sudo apt upgrade 
 
To install
 
sudo add-apt-repository ppa:bitcoin-unlimited/bucash sudo apt-get update sudo apt install bitcoind bitcoin-qt 
 
starting from this update the repository is serving also ElectrsCash(**) v.1.1.1, for now just for the amd64 architecture. To install it just execute this command:
sudo apt install electrscash 
 
See the official announcement and the release notes for more details:
https://np.reddit.com/btc/comments/g3k4mbch_unlimited_180_has_just_been_released/
https://github.com/BitcoinUnlimited/BitcoinUnlimited/blob/release/doc/release-notes/release-notes-1.8.0.md
 
Known issues:
On Ubuntu 18.04 (bionic) you'll probably get an error while trying to install bitcoind. The error message is the following:
The following packages have unmet dependencies. bitcoind : Depends: libgcc-s1 (>= 3.4) but it is not installable E: Unable to correct problems, you have held broken packages. Package libgcc-s1 is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source 
It seems like libgcc-s1 which is a focal (ubuntu 20.04, still in beta) package that has somehow crept in the bionic "food-chain", I'm working on a fix right now. Thanks to xd1gital for the initial report.
Edit: to solve the problem please do:
sudo add-apt-repository ppa:ubuntu-toolchain-test sudo apt update sudo apt dist-upgrade sudo apt install bitcoind 
 
(*) due to fact we rebranded Ubuntua PPA name along with the name of the clients, you will be displayed with this warning and question to which you could safely reply "Yes":
E: Repository 'http://ppa.launchpad.net/bitcoin-unlimited/bucash/ubuntu bionic InRelease' changed its 'Label' value from 'BU Cash' to 'BCH Unlimited' N: This must be accepted explicitly before updates for this repository can be applied. See apt-secure(8) manpage for details. Do you want to accept these changes and continue updating from this repository? [y/N] 
  (**) ElectrsCash is an efficient re-implementation of Electrum Server written in Rust.
submitted by s1ckpig to btc [link] [comments]

BCH Unlimited Ubuntu PPA repo updated to version 1.8.0

The BCH Unlimited Ubuntu PPA repository has been updated to serve version 1.8.0 is available at:

 

https://launchpad.net/~bitcoin-unlimited/+archive/ubuntu/bucash

 

This release is compatible the Bitcoin Cash protocol. To update already installed packages (*):

 

sudo apt update
sudo apt upgrade

 

To install

 

sudo add-apt-repository ppa:bitcoin-unlimited/bucash
sudo apt-get update
sudo apt install bitcoind bitcoin-qt

 

starting from this update the repository is serving also ElectrsCash(**) v.1.1.1, for now just for the `amd64` architecture. To install it just execute this command:

sudo apt install electrscash

 

See the official announcement and the release notes for more details:

https://np.reddit.com/btc/comments/g3k4mbch_unlimited_180_has_just_been_released/

https://github.com/BitcoinUnlimited/BitcoinUnlimited/blob/release/doc/release-notes/release-notes-1.8.0.md

 

Known issues:

On Ubuntu 18.04 (bionic) you'll probably get an error while trying to install `bitcoind`. The error message is the following:

The following packages have unmet dependencies.
bitcoind : Depends: libgcc-s1 (>= 3.4) but it is not installable
E: Unable to correct problems, you have held broken packages.

Package libgcc-s1 is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

It seems like [libgcc-s1](https://packages.ubuntu.com/focal/libgcc-s1) which is a focal (ubuntu 20.04, still in beta) package that has somehow crept in the bionic "food-chain", I'm working on a fix right now. Thanks to xd1gital for the initial report.

 

(*) due to fact we rebranded Ubuntua PPA name along with the name of the clients, you will be displayed with this warning and question to which you could safely reply "Yes":

E: Repository 'http://ppa.launchpad.net/bitcoin-unlimited/bucash/ubuntu bionic InRelease' changed its 'Label' value from 'BU Cash' to 'BCH Unlimited'
N: This must be accepted explicitly before updates for this repository can be applied. See apt-secure(8) manpage for details.
Do you want to accept these changes and continue updating from this repository? [y/N]

 
(**) ElectrsCash is an efficient re-implementation of Electrum Server written in Rust.
submitted by s1ckpig to Bitcoincash [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

Running eclair with bitcoin-qt. (Ubuntu)

Trying to get eclair (lightning serveapp gui) to run and having issues. Seems I need to run qt in server mode so it can run the RPC server. Doing this in the command line however launches Bitcoin qt again and it attempts to reindex the whole blockchain (even though it's run from same location)... What am I doing wrong?
Interested also if anyone is running qt on Ubuntu and also attempting to experiment with lightning ...tips tricks etc..
submitted by hungdoge to Bitcoin [link] [comments]

Bitcoin Unlimited Ubuntu PPA repo updated to version 1.7.0

The Bitcoin Unlimited Ubuntu PPA repository has been updated to serve BU version 1.7.0 is available at:
 
https://launchpad.net/~bitcoin-unlimited/+archive/ubuntu/bucash
 
This release is compatible the Bitcoin Cash protocol. To update already installed packages:
 
sudo apt update sudo apt upgrade 
 
To install
 
sudo add-apt-repository ppa:bitcoin-unlimited/bucash sudo apt-get update sudo apt install bitcoind bitcoin-qt 
 
starting from this update the repository is serving also ElectrsCash(*) v.1.0, for now just for the amd64 architecture. To install it just execute this command:
sudo apt install electrscash 
 
See the official announcement and the release notes for more details:
https://np.reddit.com/btc/comments/dgc8mq/bitcoin_unlimited_170_has_just_been_released/
https://github.com/BitcoinUnlimited/BitcoinUnlimited/blob/bucash1.7.0.0/doc/release-notes-bucash.md
 
(*) ElectrsCash is an efficient re-implementation of Electrum Server written in Rust
submitted by s1ckpig to btc [link] [comments]

Bitcoin Unlimited Ubuntu PPA repo updated to version 1.7.0

The Bitcoin Unlimited Ubuntu PPA repository has been updated to serve BU version 1.7.0 is available at:
 
https://launchpad.net/~bitcoin-unlimited/+archive/ubuntu/bucash
 
This release is compatible the Bitcoin Cash protocol. To update already installed packages:
 
sudo apt update sudo apt upgrade 
 
To install
 
sudo add-apt-repository ppa:bitcoin-unlimited/bucash sudo apt-get update sudo apt install bitcoind bitcoin-qt 
 
starting from this update the repository is serving also ElectrsCash(*) v.1.0, for now just for the amd64 architecture. To install it just execute this command:
sudo apt install electrscash 
 
See the official announcement and the release notes for more details:
https://np.reddit.com/btc/comments/dgc8mq/bitcoin_unlimited_170_has_just_been_released/
https://github.com/BitcoinUnlimited/BitcoinUnlimited/blob/bucash1.7.0.0/doc/release-notes-bucash.md
 
(*) ElectrsCash is an efficient re-implementation of Electrum Server written in Rust
submitted by s1ckpig to Bitcoincash [link] [comments]

Bitcoin Unlimited Ubuntu PPA repo updated to version 1.7.0

The Bitcoin Unlimited Ubuntu PPA repository has been updated to serve BU version 1.7.0 is available at:
 
https://launchpad.net/~bitcoin-unlimited/+archive/ubuntu/bucash
 
This release is compatible the Bitcoin Cash protocol. To update already installed packages:
 
sudo apt update sudo apt upgrade 
 
To install
 
sudo add-apt-repository ppa:bitcoin-unlimited/bucash sudo apt-get update sudo apt install bitcoind bitcoin-qt 
 
starting from this update the repository is serving also ElectrsCash(*) v.1.0, for now just for the amd64 architecture. To install it just execute this command:
sudo apt install electrscash 
 
See the official announcement and the release notes for more details:
https://np.reddit.com/btc/comments/dgc8mq/bitcoin_unlimited_170_has_just_been_released/
https://github.com/BitcoinUnlimited/BitcoinUnlimited/blob/bucash1.7.0.0/doc/release-notes-bucash.md
 
(*) ElectrsCash is an efficient re-implementation of Electrum Server written in Rust
submitted by s1ckpig to bitcoin_unlimited [link] [comments]

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

Dogecoin on Linux - The Complete Beginner's Guide

I'm writing this because I couldn't find a single condensed guide on compiling the wallet and running mining software on linux, specficially Ubuntu/Linux Mint. I combed Bitcoin and Litecoin forums for similar problems I was running into and eventually got everything nailed down, so here it is in one place, for new Shibes.
If you want to make a Dogecoin directory in your downloads folder to keep things organized, you will need to modify these commands to refelct the change. So instead of going to ~/Downloads/ you will need to go to ~/Downloads/Dogecoin and be sure to put the zipped files there when you download them, but the commands will be the same otherwise.
cwayne18 put in the work to make a PPA for the QT client here.
Ubunutu/Mint/Debian users should be able to install the client with the following commands:
sudo add-apt-repository ppa:cwayne18/doge sudo apt-get update && sudo apt-get install dogecoin-qt 
To update using this method, run
sudo apt-get update && sudo apt-get upgrade dogecoin-qt 
Compiling the Wallet Manually
I suggest using the PPA above, but if you want to compile manually, here you go.
1)Download the newest source from here. If you want to check out the Github page, click here
2)Unzip the package with the native client OR, navigate to your downloads and unzip
cd ~/Downloads unzip dogecoin-master.zip 
3)Now it's time to compile. You will need to install the dependencies, just copy and paste the following code. It will be a fairly large download and could take some time. It is always important to update before installing any new software, so we'll do that first and then install the dependencies.
sudo apt-get update sudo apt-get upgrade sudo apt-get install libssl-dev libdb-dev libdb++-dev libqrencode-dev qt4-qmake libqtgui4 libqt4-dev sudo apt-get install libminiupnpc-dev libminiupnpc8 libboost-all-dev build-essential git libboost1.53-all-dev 
4)Once that is done, go to the doge-coin master directory and compile:
cd ~/Downloads/dogecoin-maste sed -i 's/-mgw46-mt-sd-1_53//g' dogecoin-qt.pro qmake USE_UPNP=- USE_QRCODE=0 USE_IPV6=0 make -j3 
After running the qmake command you will likely see some text similar to
Project MESSAGE: Building without UPNP support Project MESSAGE: Building with UPNP supportRemoved plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. 
It's perfectly normal, so don't worry about that.
Your Dogewallet is ready to go! The executable is in ~/Downloads/dogecoin-maste and called dogecoin-qt. Your wallet information is in ~/.dogecoin. You can run the wallet at any time by opening terminal and typing
cd ~/Downloads/dogecoin-maste ./dogecoin-qt 
Future upgrades to dogewallet are easy. Back up your wallet.dat, and simply follow the same directions above, but you'll be unzipping and building the newer version. You will likely need to rename the old dogecoin-master directory in ~/Downloads before unzipping the newest version and building. Also, it is likely that you will not need to install the dependencies again.
Alternate Method For Installing Dogecoin Wallet from Nicebreakfast
After installing the dependencies listed in step 3, open terminal, then navigate to where you want Dogecoin Wallet stored and run:
git clone https://github.com/dogecoin/dogecoin ./autogen.sh ./configure make 
then when the wallet is updated just run
git pull 
from the dogecoin directory.
GPU Mining
GPU mining requires CGminer. My suggestion is to get the executable already built. The creator of cgminer has removed the built file from his website, but I've uploaded it here
sudo apt-get install pkg-config opencl-dev libcurl4-openssl-dev autoconf libtool automake m4 ncurses-dev cd ~/Downloads tar -xvf cgminer-3.7.2-x86_64-built.tar.bz2 
Don't use anything newer than 3.7.2. The newer versions of CGMiner don't support GPU mining.
That's it! You have cgminer ready to go! You will run cgminer with the following syntax
cd ~/Downloads/cgminer-3.7.2-x86_64-built/ ./cgminer --scrypt -o stratum+tcp://SERVERNAME:PORT -u WORKER.ID -p PASS 
A good guide for fine tuning cgminer can be found here; follow the litecoin example.
EDIT
I had trouble getting cgminer running with a single line command, but running it via an executable .sh file works. This is covered in the cgminer setup guide I posted above but I'll put it here too. In the same directory that has the cgminer executable, you need to make a file called cgminer.sh and make it executable. It should contain the follwing:
export GPU_USE_SYNC_OBJECTS=1 export GPU_MAX_ALLOC_PERCENT=100 export DISPLAY=:0 find *.bin -delete sleep 5 ./cgminer 
Then you can call cgminer in terminal by doing ./cgminer.sh You will need a cgminer.conf file containing all your options. All of this is covered in the guide that is linked above.
A quick note about AMD drivers: They used to be a huge PITA to install and get working, but the newest Catalyst drivers are great. There's a GUI installer, everything works out of the box, and there is a lot of documentation. You can download them here: AMD Catalyst 14.6 Beta Linux
CPU Mining
For CPU mining I use minerd because it doesn't require any work to get running, simply download it and get to work. Download the built file for your machine 32-bit or 64-bit, and then unzip it and you're ready to go!
cd ~/Downloads tar -xvf pooler-cpuminer-2.3.2-linux-x86.tar.gz 
The executable is called minerd and it will be in ~/Downloads but you can move it to wherever you like. To run it, pull up terminal and do
cd ~/Downloads minerd --url=stratum+tcp://SERVER:PORT --userpass=USERNAME.WORKERNAME:WORKERPASSWORD 
You're done! Happy mining!
Common Issues
I ran into this and I've seen others with this problem as well. Everything installs fine but there is a shared library file that isn't where it should be. In fact, it isn't there at all.
 libudev.so.1: cannot open shared object file: No such file or directory 
In terminal, do
sudo updatedb locate libudev.so.0.13.0 
And it will probably return a path /lib/x86_64-linux-gnu. Inside that directory there's a library file called libudev.so.0.13.0. You'll need to make a symlink (aka shortcut) that links libudev.so.1 to libudev.so.0.13.0 So, assuming you're working with libudev.so.0.13.0 do this
cd /lib/x86_64-linux-gnu sudo ln -s libudev.so.0.13.0 libudev.so.1 
Now if you do
ln -l 
You should see
libudev.so.1 -> ./libudev.so.0.13.0 
Meaning you've made the symlink. Also, the text for libudev.so.1 will be blue.
submitted by Boozybrain to dogecoin [link] [comments]

How to Mine BiblePay on Linux

This guide is outdated, please refer to:
https://wiki.biblepay.org/POBH_Setup
https://wiki.biblepay.org/PODC_Setup
 
 
 
 
 
 
 
 
IMPORTANT - Evolution Upgrade:
Quick Start https://wiki.biblepay.org/Quick_Start
Evolution Upgrade Information https://wiki.biblepay.org/Evolution_Upgrade
Getting Started with Evolution https://wiki.biblepay.org/Getting_Started_with_Evolution
Generic Smart Contracts https://wiki.biblepay.org/Generic_Smart_Contracts
What is BiblePay Evolution? https://www.reddit.com/BiblePay/comments/bifvpk/biblepay_evolution_what_is_it/
Recommend 2GB RAM or can get stuck compiling (if 1GB RAM can use Swap File) Use Ubuntu 16.04
INFO
https://github.com/biblepay/biblepay-evolution/blob/masteBuildBiblePay.txt
INSTALL COMMANDS
apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler apt-get install git apt-get install curl build-essential libtool autotools-dev automake pkg-config python3 bsdmainutils cmake sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev git clone http://github.com/biblepay/biblepay-evolution prefix=x86_64-pc-linux-gnu cd biblepay-evolution/depends make -j4 # Choose a good -j value, depending on the number of CPU cores available cd .. ./autogen.sh #Note: if echo `pwd` does not return your working directory, replace it with your working directory such as /biblepay-evolution/ ./configure --prefix `pwd`/depends/x86_64-pc-linux-gnu make # See more here: #https://github.com/biblepay/biblepay-evolution/blob/mastedoc/build-unix.md 

SWAP FILE
NOTE: if server is 1GB RAM, before running last command "sudo make", set up a swap file
free #check if swap is 0 dd if=/dev/zero of=/vaswap.img bs=1024k count=1000 mkswap /vaswap.img swapon /vaswap.img free #check if swap is 1024 sudo make 

RUN COMMAND LINE
cd src ./biblepayd -daemon 
OR
RUN GUI
Your GUI program will be located in: /biblepay-evolution/src/qt
./biblepay-qt 
You can also run it in the background (to free up your terminal) if you call it with:
./biblepay-qt & 
To start mining, instructions are the same as for Windows: Go to Tools -> Debug Console
Execute this command (to start mining with 8 threads)
setgenerate true 8 
From there you can use all other commands such as getmininginfo, getwalletinfo, etc. Execute help command to get the list of all available commands.
Note: GUI will be built automatically only if you meet the requirements for qt library, i.e. make sure you ran this line before compiling:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler 
BIBLEPAY is now Running!

SETUP CONFIG
Stop BiblePay and set up the config file to get starting nodes to sync with and enable mining:
./biblepay-cli stop cd ~/.biblepayevolution/ vi biblepay.conf addnode=node.biblepay.org gen=1 genproclimit=1 
Escape Key + : (Colon Key) + w + q + Enter (saves file and quits)

addnode --- adds a node to the list of nodes to connect to gen=1 --- turns on mining genproclimit --- sets number of threads to use when mining

Run BiblePay again and fully sync with network
cd ../biblepay-evolution/src ./biblepayd -daemon ./biblepay-cli getinfo 

USEFUL COMMANDS
./biblepay-cli help ./biblepay-cli getaccountaddress "" ./biblepay-cli getinfo ./biblepay-cli getmininginfo ./biblepay-cli setgenerate true 8 ./biblepay-cli sendtoaddress "insertAddressHere" 777 "" "" true ./biblepay-cli stop ./biblepayd -daemon top #CPU usage q to quit 

MINING THREADS: To change number of threads to use up for mining
a. Edit home/yourusername/.biblepayevolution/biblepay.conf file:
genproclimit=X 
and restart BiblePay -or- b. Menu >> Tools >> Debug Console >> Type command:
setgenerate true X 
(Replace X with number of threads Use top command to view CPU usage)

POOL
NOTE: To use the pool you must now use the external miner, not the wallet miner https://whitewalr.us/2019/biblepay-nomp-pool-mining.html
  1. Set up an account on pool website: https://pool.biblepay.org/
  2. Create Worker Username(s) - Workers tab >>> Add
  3. Enable pool and add Worker Username in ~/.biblepayevolution/biblepay.conf file, add these lines and save:
    pool=https://pool.biblepay.org workerid=insertWorkerUsernameHere
4. Restart BiblePay
./biblepay-cli stop ./biblepayd -daemon 
Setup Auto-Withdraw Navigate to Account >>> Account Settings >>> Verify your BBP Receiving Address >>> Click Authorize-Auto-Withdraws

UPDATE:

### Turn off/stop BiblePay
cd /home/yourname/biblepay-evolution/src ./biblepay-cli stop 

### Pull down latest Biblepay code and build it
cd /home/yourname/biblepay-evolution git pull origin master sudo make 

### Turn BiblePay back on and check version number
cd src ./biblepayd -daemon ./biblepay-cli getinfo ./biblepay-cli setgenerate true 8 

UPDATE IN ONE COMMAND:
./biblepay-evolution/src/biblepay-cli stop ; cd && cd biblepay-evolution/ && git pull origin master && sudo make && cd src && ./biblepayd -daemon && sleep 90 && ./biblepay-cli getmininginfo 
Note: the ";" says do this after, regardless of the outcome Note: && says do this after only if previous command finished with no errors

SPEED UP COMPILE:
To speed up the compile time, add -j4 or -j8 after make. This way it compiles using 4 or 8 threads instead of just 1.
./configure LDFLAGS="-L${BDB_PREFIX}/lib/" CPPFLAGS="-I${BDB_PREFIX}/include/" sudo make -j8 
Reference: http://www.linux-databook.info/?page_id=2319

RSYNC stop biblepay from your nodes compile on your fastest machine then rsync with your machines only src folder is required
rsync -avuz /root/biblepay-evolution/src/ [email protected]:/root/biblepay-evolution/src/ 
https://stackoverflow.com/questions/3299951/how-to-pass-password-for-rsync-ssh-command https://www.thegeekstuff.com/2008/11/3-steps-to-perform-ssh-login-without-password-using-ssh-keygen-ssh-copy-id/
people make cron jobs and rsync automatically

OUTDATED

Unofficial Bash Script
https://gist.github.com/anonymous/d1c1d35e3c8f67f5fb2e204479fa5c6b

Official Ubuntu Package
https://launchpad.net/~biblepay-official

Unofficial Ubuntu Package
https://www.reddit.com/BiblePay/comments/7rwqqs/unofficial_ubuntu_packages_available/

Unofficial Mine in One Line
https://www.reddit.com/BiblePay/comments/7ryuk1/mine_in_one_line/
NOTE: DONT RUN ON A COMPUTER WITH COINS -- THIS IS A CLEAN INSTALL SCRIPT

COMPILE WITHOUT GUI: https://bitcointalk.org/index.php?topic=2042657.msg21878317#msg21878317 https://bitcointalk.org/index.php?topic=2042657.msg21878389#msg21878389
ADVANCED:

DOCKER IMAGES (NOTE: I havent tested these, use at your own risk) https://hub.docker.com/gagaha/biblepay/ https://hub.docker.com/cryptozero/biblepay-opt/
submitted by togoshige to BiblePay [link] [comments]

Interested in contributing to the BTC network? Here is the steps to get a full node up and running in Linux.

These instructions will work both on a VPS cloud server or a personal computer. You may find cheap VPS somewhere online for rent.
What Is A Full Node?
A full node is a program that fully validates transactions and blocks. Almost all full nodes also help the network by accepting transactions and blocks from other full nodes, validating those transactions and blocks, and then relaying them to further full nodes.
Most full nodes also serve lightweight clients by allowing them to transmit their transactions to the network and by notifying them when a transaction affects their wallet. If not enough nodes perform this function, clients won’t be able to connect through the peer-to-peer network—they’ll have to use centralized services instead.
Many people and organizations volunteer to run full nodes using spare computing and bandwidth resources—but more volunteers are needed to allow Bitcoin to continue to grow. This document describes how you can help and what helping will cost you.
Costs And Warnings
Running a Bitcoin full node comes with certain costs and can expose you to certain risks. This section will explain those costs and risks so you can decide whether you’re able to help the network.
Special Cases
Miners, businesses, and privacy-conscious users rely on particular behavior from the full nodes they use, so they will often run their own full nodes and take special safety precautions. This document does not cover those precautions—it only describes running a full node to help support the Bitcoin network in general.
Please consult an expert if you need help setting up your full node correctly to handle high-value and privacy-sensitive tasks.
Secure Your Wallet
It’s possible and safe to run a full node to support the network and use its wallet to store your bitcoins, but you must take the same precautions you would when using any Bitcoin wallet. Please see the securing your wallet page for more information.
Minimum Requirements
Bitcoin Core full nodes have certain requirements. If you try running a node on weak hardware, it may work—but you’ll likely spend more time dealing with issues. If you can meet the following requirements, you’ll have an easy-to-use node.
Note: many operating systems today (Windows, Mac, and Linux) enter a low-power mode after the screensaver activates, slowing or halting network traffic. This is often the default setting on laptops and on all Mac OS X laptops and desktops. Check your screensaver settings and disable automatic “sleep” or “suspend” options to ensure you support the network whenever your computer is running.
Possible Problems
Legal: Bitcoin use is prohibited or restricted in some areas.
Bandwidth limits: Some Internet plans will charge an additional amount for any excess upload bandwidth used that isn’t included in the plan. Worse, some providers may terminate your connection without warning because of overuse. We advise that you check whether your Internet connection is subjected to such limitations and monitor your bandwidth use so that you can stop Bitcoin Core before you reach your upload limit.
Anti-virus: Several people have placed parts of known computer viruses in the Bitcoin block chain. This block chain data can’t infect your computer, but some anti-virus programs quarantine the data anyway, making it more difficult to run a full node. This problem mostly affects computers running Windows.
Attack target: People who want to disrupt the Bitcoin network may attack full nodes in ways that will affect other things you do with your computer, such as an attack that limits your available download bandwidth or an attack that prevents you from using your full node’s wallet for sending transactions.
Linux Instructions
The following instructions describe installing Bitcoin Core on Linux systems.
Ubuntu 14.10 Instructions for Bitcoin Core 0.10.0.
If you use Ubuntu Desktop, click the Ubuntu swirl icon to start the Dash and type “term” into the input box. Choose any one of the terminals listed:
Alternatively, access a console or terminal emulator using another method, such as SSH on Ubuntu Server or a terminal launcher in an alternative desktop environment.
Type the following line to add the Bitcoin Personal Package Archive (PPA) to your system:
sudo apt-add-repository ppa:bitcoin/bitcoin
You will be prompted for your user password. Provide it to continue. Afterwards, the following text will be displayed:
Stable Channel of bitcoin-qt and bitcoind for Ubuntu, and their dependencies
More info: https://launchpad.net/~bitcoin/+archive/ubuntu/bitcoin
Press [ENTER] to continue or ctrl-c to cancel adding it
Press enter to continue. The following text (with some variations) will be displayed and you will be returned to the command line prompt:
gpg: keyring /tmp/tmpixuqu73x/secring.gpg' created gpg: keyring/tmp/tmpixuqu73x/pubring.gpg' created gpg: requesting key 8842CE5E from hkp server > > > >keyserver.ubuntu.com gpg: /tmp/tmpixuqu73x/trustdb.gpg: trustdb created gpg: key 8842CE5E: public key "Launchpad PPA for Bitcoin" imported gpg: no ultimately trusted keys found gpg: Total number processed: 1 pg: imported: 1 (RSA: 1) OK
Type the following line to get the most recent list of packages:
sudo apt-get update
A large number of lines will be displayed as different update files are downloaded. This step may take several minutes on a slow Internet connection.
To continue, choose one of the following options
sudo apt-get install bitcoin-qt
sudo apt-get install bitcoind
sudo apt-get install bitcoin-qt bitcoind
After choosing what packages to install, you will be asked whether you want to proceed. Press enter to continue.
If you’re logged in as an administrative user with sudo access, you may log out. The steps in this section should be performed as the user you want to run Bitcoin Core. (If you’re an expert administrator, you can make this a locked account used only by Bitcoin Core.)
Before using the Bitcoin Core daemon, bitcoind, you need to create its configuration file with a user name and password. First create the .bitcoin directory, create (touch) the file, and set the file’s permissions so that only your user account can read it. From the terminal, type:
mkdir ~/.bitcoin touch ~/.bitcoin/bitcoin.conf chmod 600 ~/.bitcoin/bitcoin.conf
Then you can run the command bitcoind. It will print output similar to this:
bitcoind Error: To use the "-server" option, you must set a rpcpassword in the configuration file: /home/bitcoinorg/.bitcoin/bitcoin.conf It is recommended you use the following random password: rpcuser=bitcoinrpc rpcpassword=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX (you do not need to remember this password)
The username and password MUST NOT be the same.
If the file does not exist, create it with owner-readable-only file permissions. It is also recommended to set alertnotify so you are notified of problems; for example: alertnotify=echo %s | mail -s "Bitcoin Alert" [email protected] The “rpcpassword” displayed will be unique for your system. You can copy the rpcuser and rpcpassword lines into your configuration file using the following commands. Note that in most Ubuntu terminals, you need to press Ctrl-Shift-C to copy and Ctrl-Shift-V to paste because Ctrl-C and Ctrl-V have different meanings in a Unix-style terminal.
echo rpcuser=bitcoinrpc >> ~/.bitcoin/bitcoin.conf echo rpcpassword=XXXXXX >> ~/.bitcoin/bitcoin.conf (Warning: Don’t use XXXXXX as your RPC password. Copy the rpcpassword displayed by bitcoind for your system.)
Now you can start Bitcoin Core daemon for real. Type the following command:
bitcoind -daemon
It will print a message that Bitcoin Core is starting. To interact with Bitcoin Core daemon, you will use the command bitcoin-cli (Bitcoin command line interface). Note: it may take up to several minutes for Bitcoin Core to start, during which it will display the following message whenever you use bitcoin-cli:
error: {"code":-28,"message":"Verifying blocks..."}
After it starts, you may find the following commands useful for basic interaction with your node:
to safely stop your node, run the following command:
bitcoin-cli stop
A complete list of commands is available in the Bitcoin.org developer reference.
When Bitcoin Core daemon first starts, it will begin to download the block chain. This step will take at least several hours, and it may take a day or more on a slow Internet connection or with a slow computer. During the download, Bitcoin Core will use a significant part of your connection bandwidth. You can stop Bitcoin Core at any time using the stop command; it will resume from the point where it stopped the next time you start it.
Optional: Start Your Node At Boot
Starting your node automatically each time your computer boots makes it easy for you to contribute to the network. The easiest way to do this is to start Bitcoin Core daemon from your crontab. To edit your crontab, run the following command:
crontab -e
@reboot bitcoind -daemon Save the file and exit; the updated crontab file will be installed for you. Now Bitcoin Core daemon will be automatically started each time your reboot your computer.
If you’re an Ubuntu expert and want to use an init script instead, see this Upstart script.
You have now completed installing Bitcoin Core. If you have any questions, please ask in one of Bitcoin’s many communities, such as Bitcoin StackExchange, BitcoinTalk technical support, or the #bitcoin IRC chatroom on Freenode.
To support the Bitcoin network, you also need to allow incoming connections. Please read the Network Configuration section for details.
Network Configuration
If you want to support the Bitcoin network, you must allow inbound connections.
When Bitcoin Core starts, it establishes 8 outbound connections to other full nodes so it can download the latest blocks and transactions. If you just want to use your full node as a wallet, you don’t need more than these 8 connections—but if you want to support lightweight clients and other full nodes on the network, you must allow inbound connections.
Servers connected directly to the Internet usually don’t require any special configuration. You can use the testing instructions below to confirm your server-based node accepts inbound connections.
Home connections are usually filtered by a router or modem. Bitcoin Core will request your router automatically configure itself to allow inbound connections to Bitcoin’s port, port 8333. Unfortunately many routers don’t allow automatic configuration, so you must manually configure your router. You may also need to configure your firewall to allow inbound connections to port 8333. Please see the following subsections for details.
Testing Connections
The BitNodes project provides an online tool to let you test whether your node accepts inbound connections. To use it, start Bitcoin Core (either the GUI or the daemon), wait 10 minutes, and then visit the GetAddr page (https://getaddr.bitnodes.io/). The tool will attempt to guess your IP address—if the address is wrong (or blank), you will need to enter your address manually.
For more instruction and reviews based off BTC please follow my subreddit /BTC_Reviews
all material from this post was found here --> https://bitcoin.org/en/full-node
submitted by Mattjhagen to Bitcoin [link] [comments]

Really like the watch only functionality in bitcoin core!

First of all: thanks core developers for all the efforts!
Reason: if you run a full bitcoin node, to see your total balance without exposing your addresses to others.
Did it like this on my full node (ubuntu linux, no pruning):
Backup your wallet.dat
Start: bitcoind
Execute in a script (or on the command line):
bitcoin-cli importaddress "address1" Label false
bitcoin-cli importaddress "address2" Label false
bitcoin-cli importaddress "address3" Label false
Etc.
Stop: bitcoind
Start: bitcoin-qt -rescan
bitcoin-qt will rescan the wallet and you can see the progress. When finished you will see the balance of all addresses (watch and non watch)
When running bitcoind you can get the total balance of the wallet:
bitcoin-cli getbalance "*" 0 true
To get the total balance without the watch only addresses
bitcoin-cli getbalance "*" 0 false
Combine this with an Apache server and you can watch your balance completely safe anywhere and without exposing your (HD) addresses.
Side note: you can use bitcoin-qt as a wallet without too much hinder like this:
/usbin/taskset -c 0 /usbin/ionice -c 3 /usbin/nice -n 19 /home/usebitcoin-0.11.0/src/qt/bitcoin-qt
taskset: use only one cpu
ionice: low i/o priority
nice: low cpu priority
I hope this is useful for someone.
submitted by sumBTC to Bitcoin [link] [comments]

(1) Is it true that encrypting an *existing* bitcoin-qt wallet.dat file will "invalidate" any existing backups? (2) Can I use unicode characters - eg ♥ - in the bitcoin-qt wallet passphrase?

I have an existing bitcoin-qt wallet.dat file which I want to encrypt - using the command in the bitcoin-qt Settings menu, involving creating a passphrase.
I have 2 (possibly somewhat related) questions:
TL;DR
(1) If you encrypt an existing wallet.dat file, will the backups of the old wallet.dat file still work?
(2) Can you include unicode characters - eg ♥ - in the passphrase used to encrypt a bitcoin-qt wallet.dat file?
Worst-case scenario: The answers to (1) and (2) are both "no" - and I attempt to encrypt an existing wallet using unicode, and my backups no longer work (due to a new pool of addresses somehow being created?) and the passphrase isn't what I think it is (due to the unicode characters somehow being misinterpreted?) - and then I could lose all my coins??
Details
(1) The following (old, short) thread claims that after you encrypt an existing wallet, any previous backups of that wallet will no longer work:
https://pay.reddit.com/Bitcoin/comments/1ccfdk/encrypting_walletdat_in_bitcoinqt/
Obviously, the the first response in that thread was slightly wrong, for saying that the "server" creates a new pool of 100 addresses to draw on. So using word "server" here was certainly incorrect - but maybe the gist of what they were saying might still be correct? (if you simply change "server" to "client").
I can actually understand that there might be reasons why encrypting a wallet.dat file could cause a new pool of 100 addresses to be generated.
But it does not make sense to me that this would make any older (unencrypted) backups instantly useless.
It seems to me that these older, unencrypted backups would still have their private keys intact, and could thus be used in certain (perhaps limited?) ways - such as:

(2) It seems that including a few unicode characters in the bitcoin-qt wallet passphrase would make it a lot stronger (since unicode is a much larger set of characters than ascii), so I would like to include a few.
But it would be more reassuring if it could be explicitly stated that this is indeed supported.

Possible catastrophic interaction between (1) and (2)?
If the answers to (1) and (2) were both "no" (ie, if you encrypt an existing bitcoin-qt wallet.dat file then any existing backups will not work, and unicode characters do not work in bitcoin-qt passphrases), then I'm worried there could be some kind of catastrophic interaction between (1) and (2) where I lose all my coins, as follows:
(1) I encrypt my existing wallet - making my old, unencrypted wallet.dat file now invalidated (due to something involving a new pool of addresses being generated?)
and
(2) I use a passphrase which includes unicode characters which bitcoin-qt appears to accept at the time of creation, but which doesn't work at the time of trying to decrypt the wallet.dat file (due to something going wring with how the supposed unicode characters are actually interpreted while being entered or copied-and-pasted?).
In this possible worst-case scenario, my old backups of wallet.dat no longer work, and my newly encrypted wallet.dat has some password which I'm not able to correctly enter anymore.
Sorry to be so paranoid about this!
Other remarks:
(a) I did do a (limited) test of unicode capability for bitcoin-qt wallet.dat passphrases: simply by creating a new (empty) wallet.dat file, and creating a passphrase for it involving unicode characters, and then attempting to change the passphrase (which requires entering the old passphrase that contained unicode characters).
This did seem to work ok: it let me re-enter the old passphrase (which included unicode characters) to create a new passphrase.
However, since this is an empty wallet (and since bitcoin-qt would ask for the passphrase only when attempting to actually spend from an encrypted wallet), I did not see a way to fully test whether the passphrase actually worked to decrypt a unicode-passphrase-encrypted wallet for the purpose of spending from it.
(I'm still downloading the rest of the blockchain and it's going to take at least another week on my slow connection, so don't see how I could send a small amount to the new wallet to test it either. My existing wallet.dat file was originally created on an internet-connected machine a long time ago, but it's been offline ever since, so in some sense it's kinda-sorta been in somewhat "cold" storage all this time, and I would prefer to avoid putting it online on a "hot" internet-connected machine until absolutely necessary.)
(b) Long-term, I am actually also in the process of setting up a proper cold storage system based on Armory, which I have installed on 2 Ubuntu machines (one offline and one online).
But I have a slow internet connection, and the backups of this old wallet.dat file have been sitting around unencrypted for ages (I've been relying simply on then being physically inaccessible).
Now some "things" are coming up over the next few days where I some better security right away, and it's probably going to take over a week for Armory/bitcoind to update my local copy of the blockchain.
So in the meantime, I also need some basic additional security right now - so encrypting the existing bitcoin-qt wallet.dat file using a strong passphrase (and making some new backups) seems like it could be a reasonable initial approach.
Thanks for any help!
submitted by encrypt_throwaway to Bitcoin [link] [comments]

[P2pool] How to make your own personal p2pool Node!

Tired of getting no block rewards and sending many dead shares? Need a p2pool node close to your miner? MAKE YOUR OWN! :D
And, Yep, P2pools give 0.5% Rewards to block finders!
Here's some info about p2ools: http://whatisp2pool.com/
The stronger the P2Pool network becomes the more resistant the digibyte network is to 51% attacks!
Oh and, P2pools are DDOS proof! Now that's News! So if your node gets DDOS'd .. you dont lose your shares as the shares have been saved in the p2pool, its called the sharechain. So you get paid anyhow! Thanks to the p2pool network. and you ccan set your workers to another pool using the "--failover only" command in cgminer (if im not wrong) and get it back to work on the p2pool network!
TL;DR; P2POOL = 1 Big fat network Decentrazlized pool!
STEPS TO MAKE A P2POOL:
Install Ubuntu server or Desktop if you want http://www.ubuntu.com/download/ or u can use a VPS (VirtualPrivateServer -- Link Below with coupon code)
So Let's start off in the command line (Open Terminal.. and all you have to do is Cut, Copy Paste! ;) )
Start by updating and upgrading Ubuntu, you know you want the best ;)
sudo apt-get update sudo apt-get upgrade sudo apt-get install python-software-properties sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update 
Time for the DigiByteProject dependencies!
sudo apt-get install build-essential libboost-all-dev libcurl4-openssl-dev libdb5.1-dev libdb5.1++-dev git qt-sdk libminiupnpc-dev sudo apt-get install qrencode libqrencode-dev 
And, Now to compile DigiByte on your system!
git clone git://github.com/digibyte/DigiByteProject.git digibyte #renaming makes it easier ;) cd ~/digibyte/src mkdir obj make -f makefile.unix USE_UPNP=- sudo cp digibyted /usbin cd ~ 
After it has compiled try running 'digibyted'
./digibyte/src/digibyted 
If you get an error saying you need to make the digibyte.conf file, good! :) If it doesnt give you that error, make sure you followed the compiling steps appropriately.
So, Lets create the conf file here...
cd .digibyte #edited from 'digibyted' .. fixed!! nano digibyte.conf 
Paste the following, CHANGING THE USERNAME AND PASS!! make sure to take note of both, you'll need these later!
rpcuser=CHANGEusername rpcpassword=ChangePassword daemon=1 server=1 rpcport=14022 port=12024 gen=1 rpcallowip=127.0.0.1 addnode=74.208.230.160 addnode=31.220.25.91 addnode=184.155.218.183 addnode=24.119.23.61 addnode=70.196.193.231 addnode=198.98.118.241 addnode=142.4.204.115 addnode=23.90.191.58 addnode=216.250.125.121 addnode=115.28.31.25 addnode=83.172.105.46 
Press 'CTRL' + ' X', and then 'Y' to save when prompted
cd ~ ./digibyte/src/digibyted ./digibyte/src/digibyted getinfo 
Make sure you check the latest block in the block chain or on your local DigiByte Wallets. This is to see how far your p2pool node has gotten! This is gonna take quite a while so lets CONTINUE!
Let's get the p2pool software and frontend in! Install the p2pool dependencies!
sudo apt-get install python-zope.interface python-twisted python-twisted-web git clone https://github.com/Rav3nPL/p2pool-rav p2pool #renaming it! cd ~/p2pool/digibyte_subsidy #Thanks to Chaeplin sudo python setup.py install 
Time to edit and customise the html code to personalise your p2pool's frontend. Feel free to change the p2pool name and if you're an advanced user, feel free to add your own frontend from git hub after removing the web-static folder. (OPTIONAL: by using rm -f -r web-static #in that directory. And then you can choose whichever frontend you want! by cloning it in the web-static folder)
Editing the current frontend html!
cd .. cd web-static nano index.html 
After personalising the page, i.e. changing the p2pool name and adding some info! Lets go back and check how far the block downloading has gotten! You can check this by typing this in the command line after going back to the root directory:
cd ~ ./digibyte/src/digibyted getinfo 
This is gonna take a while so might as well check for updates again :P
sudo apt-get update sudo apt-get upgrade 
After making sure that all the blocks have been synced locally! We're ready to run the p2pool node! Simply enter the string below in the command line, entering your USERNAME and PASS that you saved earlier!
screen -d -m -S myp2pool ~/p2pool/run_p2pool.py --give-author 0 --net digibyte NEWUSER NEWPASS --outgoing-conns 4 
If you want to charge a fee for your node add this to your string, adding your fee address!:
--fee 1.0 --address NEWDGBADDRESS 
To see if the node is up and running enter this in the command line:
screen -x myp2pool 
'CTRL' + 'A' + 'D' to close the terminal if you press 'CTRL' + 'C', it will terminate the p2pool program and you'll have to restart the pool by using the string above!
Once, Everything is setup as planned! Check your p2pool node's ip Address by entering this into the command line:
ifconfig 
inet addr: 192.168.1.1 #You'll see a line like this.
So, Your cgminer string should look something like this:
cgminer --scrypt -o 192.168.1.1:9022 -u DGBADDRESS -p x
And your p2pool WEB ADDRESS should look like this:
192.168.1.1:9022
example: http://192.168.1.1:9022/
You can monitor your p2pool using that web address! Enjoy, your personal p2pool node!! :D
If for whatever reason the server shuts off and you need to restart the p2pool node, you should run digibyted again and after it has synced successfully, just type in your p2pool string:
./digibyte/src/digibyted
screen -d -m -S myp2pool ~/p2pool/run_p2pool.py --give-author 0 --net digibyte NEWUSER NEWPASS --outgoing-conns 4 --fee 1.0 --address NEWADDRESS
PRESS CTRL + A + D to Detach from screen
UPDATE Follow Guide below if you used this guide before DigibByte v2.0 was released (28th Feb 2014)
You must check whether you're on the right ShareChain. Make Sure the block Value says 7960!
https://bitcointalk.org/index.php?topic=408268.msg5440858#msg5440858
This Tutorial was made with the help of an existing Guide: http://doges.org/index.php?topic=5586.0 Kudos to crypto49er!
If you want to do this on a VPS:
Here's a link to a VPS hosting site:
https://www.digitalocean.com/
Feel free to use my $10 ref. code -- it doesnt really make a difference, though.
https://www.digitalocean.com/?refcode=dc909c442664
Let me know if this guide helped!
submitted by StormMiner to Digibyte [link] [comments]

[TUTORIAL:] Creating a custom wallet. Part 1: Proof of concept.

Download and view this tutorial on GITHUB
I'm teaching myself the technical aspects of Bitcoin. I decided to start by making a custom wallet. Here is my quick and dirty proof of concept using Python, bitoinrpc, and PyQt.
So far, this only queries bitcoind for getinfo. It's only a stepping stone to the greater application.
I'll make more tutorials as the program develops. Please feel free to comment and ask questions. Keep in mind, Python isn't my primary language. I decided to go with Python only because I could use the practice.
I wrote this using Linux. It should work on Windows / Mac, but your mileage may vary. To use this, you are going to need Python 2.7 installed on your machine (obviously) as well as the dependent libraries: PyQt, Python bitcoinrpc, and json. Copy and paste the code in a file somewhere and run
$ python  
Change "rpc_username" and "rpc_password" to match that of ~/.bitcoin/bitcoin.conf
Make sure ./bitcoind -server is running
If everything is set up correctly you should see a gui app appear with the same information as if you were to run bitcoind getinfo from the command line.
#!/usbin/python # -*- coding: utf-8 -*- import sys from PyQt4 import QtGui from bitcoinrpc.authproxy import AuthServiceProxy import json class Configuration(): def __init__(self): self.protocol = "http" self.username = "rpc_username" self.password = "rpc_password" self.ip = "localhost" #self.port = "18332" self.port = "8332" def get_uri(self): self.uri = self.protocol+"://"+self.username+":"+self.password+"@"+self.ip+":"+self.port return self.uri class Command(): def __init__(self): self.conf = Configuration() self.access = AuthServiceProxy(self.conf.get_uri()) def get_info(self): self.info = self.access.getinfo() #self.info = self.access.listaccounts() return self.info class UI(QtGui.QWidget): def __init__(self): super(UI, self).__init__() self.init_ui() def init_ui(self): command = Command() info = command.get_info() keys = info.keys() label = [] line_edit = [] for (i, key) in enumerate(keys): label.append(QtGui.QLabel(str(keys[i]))) line_edit.append(QtGui.QLineEdit(str(info[keys[i]]))) grid = QtGui.QGridLayout() grid.setSpacing(10) for (i, item) in enumerate(label): grid.addWidget(label[i], i, 0) grid.addWidget(line_edit[i], i, 1) self.setLayout(grid) self.setGeometry(300, 300, 350, 300) self.setWindowTitle('getinfo') self.show() def main(): app = QtGui.QApplication(sys.argv) ex = UI() sys.exit(app.exec_()) if __name__ == '__main__': main() 
Features of note:
In the future I may just link to a github account. Time permitting.
Let me know what you think. Thanks!
submitted by Joshka to BitcoinDevelopers [link] [comments]

[Hiring] Write some Bitcoin-Qt commands templates to sign transaction on offline machine.

Its not necessary to have too much experience with Bash, but I prefer making these scripts in Bash.
Or I need any solution to make my Ubuntu machine to be able to sign transactions (but receiving commands to move funds from Web-server or from FTP)
Anyway even if you're newbie in Linux but have experience with Bitcoin-Qt I am still interested in your skills, because I believe I could show you how easy it is to send commands to Bitcoin-Qt in Ubuntu Terminal (I will give an access)
I think the price here will be depending on hourly basis, so think about what is your hourly rate or other measure of payment and I will be glad to pay you Bitcoins.
submitted by XfsMonsta to Jobs4Bitcoins [link] [comments]

" Bitcoin bad " [ participating ] Heartbleed vulnerability affects bitcoins ... ( Chinese hackers published technical affirm ) - Transfer from Bitcoin first Chinese community -

weibo: http://weibo.com/5107450688/B0Kv8hLAk
BBS: http://bbs.btcman.com/forum.php?mod=viewthread&tid=17782&page=1&extra=#pid82563#0-tsina-1-83270-397232819ff9a47a7b7e80a40613cfe1
Heartbleed vulnerability affects bitcoin ... let the brother in person to tell you how dangerous loophole Heartbleed
Disclaimer: This article caused by subsequent exposure , at your own liability .
Author : btcrobot
Contribute BTC: 1NDnnWCUu926z4wxA3sNBGYWNQD3mKyes8 Originally wanted to write articles related articles side chains , but feel deep enough , the other seems a bit of a MM Frank wrote , brother does not like re- nonsense, direct point of security-related today . . . . .
Evil octal dividing line . . . . . . . . . . . .
About Heartbleed loopholes, as a bit of people , must be sensitive to , ah, brother of the first time I felt vulnerability unlimited , ideas unlimited , unlimited play , as to get rid of xxx, it needs Martian guts , brother still relatively conservative , but in another way detour and the line, this is just to let you experience the next :
Steps are as follows :
1 find various bits coins, currency cottage client IP address , find a specific port, which enable SSL
Get bitcoin client ip installed two ways :
1 Download a qt-bitcoin client, open debug.log, ok it collects inside IP
2014-04-21 01:53:27 init message: loading is complete 2014-04-21 01:53:27 Initialization result: 1 2014-04-21 01:53:28 ERROR: GetMyExternalIP (): connection closed 2014-04-21 01:53:28 receive version message: / Satoshi: 0.8.5 /: version 70001, blocks = 296904, us = 219.147.23.114:1650, them = 58.64.155.69:8333, peer = 58.64.155.69 : 8333 2014-04-21 01:53:28 Added time data, samples 2, offset -6 (+0 minutes) 2014-04-21 01:53:33 ERROR: GetMyExternalIP (): connection to 74.208.43.192:80 failed 2014-04-21 01:53:35 receive version message: / Satoshi: 0.8.2.2 /: version 70001, blocks = 296904, us = 219.147.23.114:1657, them = 192.155.81.62:8333, peer = 192.155.81.62 : 8333 2014-04-21 01:53:35 Added time data, samples 3, offset -13 (+0 minutes) 2014-04-21 01:53:35 No valid UPnP IGDs found 2014-04-21 01:53:35 upnp thread exit 2014-04-21 01:53:36 receive version message: / Satoshi: 0.8.5 /: version 70001, blocks = 296904, us = 219.147.23.114:1659, them = 194.71.109.94:8333, peer = 194.71.109.94 : 8333 2014-04-21 01:53:36 Added time data, samples 4, offset +12 (+0 minutes) 2014-04-21 01:53:36 socket recv error 10054 2014-04-21 01:53:41 ERROR: GetMyExternalIP (): connection closed 2014-04-21 01:53:48 receive version message: / Satoshi: 0.9.99 /: version 70002, blocks = 296904, us = 219.147.23.114:1680, them = 71.13.251.162:8333, peer = 71.13.251.162 : 8333 2014-04-21 01:53:48 Added time data, samples 5, offset -12 (+0 minutes) 2014-04-21 01:53:48 nTimeOffset = -6 (+0 minutes) 2014-04-21 01:53:48 ERROR: GetMyExternalIP (): connection to 212.117.175.194:80 failed 2014-04-21 01:53:48 ext-ip thread exit 2014-04-21 01:53:49 receive version message: / Satoshi: 0.9.1 /: version 70002, blocks = 296904, us = 219.147.23.114:1681, them = 68.151.120.205:8333, peer = 68.151.120.205 : 8333 2014-04-21 01:53:49 Added time data, samples 6, offset -13 (+0 minutes) 2014-04-21 01:53:50 receive version message: / Satoshi: 0.9.0 /: version 70002, blocks = 296904, us = 219.147.23.114:1682, them = 88.178.92.109:8333, peer = 88.178.92.109 : 8333 2014-04-21 01:53:50 Added time data, samples 7, offset -12 (+0 minutes) 2014-04-21 01:53:50 nTimeOffset = -12 (+0 minutes)
Look at these IP right, gather next :)
2 Use blockchain, this can cause huge point , opening https://blockchain.info/zh-cn/connected-nodes
Not only know the IP, and intuitively know the client version used for those versions vulnerable , silent, huh. .
file :/ / / C: \ DOCUME ~ 1 \ ADMINI ~ 1 \ LOCALS ~ 1 \ Temp \ ksohtml \ wps_clip_image-28929.png
3 write a small crawler , automated constantly crawl the IP, NG saved as a file in the following format , do not ask me to code. . . Their play to 193.109.68.62 212.3.147.37 Xxx Yyy . . . .
4 Improved bleed procedures through the entire document , well, to the point code
func readLines (path string) ([] string, error) { file, err: = os.Open (path) if err! = nil { return nil, err .... 00000580 32 32 2d 31 33 39 32 38 39 37 31 31 31 30 30 30 | 22-1392897111000 | ........
| onnection: keep-| | alive .. If-Modifi | | ed-Since: Fri, 1 | | 1 Apr 2014 10:35 | |: 05 GMT ........; | | `...... ~ 9D .. X. .. |
https://5.9.121.236/login/
If 443 , if it is a server , I rely on you regularly collect it, pattern matching. . . . Bypass to the other , web springboard , and the like . . . If ssl + rpc, broken rpc, if not set the wallet password, and then send a command transfer bitcoins , oh, my god ...
Bitcoins are so cottage currency would not have said that if there is 443 loopholes still be out of every minute . . .
heartbleed bitcoin client to attack , in the case of open rpc protocol , using ssl certification, can be attacked . This is the vast majority of the server program will open options. Individual users should not panic. . . .
Well, not much to say , and you figure it out , and quickly upgrade it, rose no harm ! ! ! ! The key is to site users , exchanges, router port mapping is also careful. .
Disclaimer: purely technical discussion, in fact, I guess black circle know. . . Sent to run the risk of being accused of a two-way . . . You feel for it. .
https://bitcoin.org/en/alert/2014-04-11-heartbleed
OpenSSL Heartbleed vulnerability 11 April 2014What happened The version of OpenSSL used by Bitcoin Core software version 0.9.0 and earlier contains a bug that can reveal memory to a remote attacker. See http://heartbleed.com/ for details. What you should do Immediately upgrade to Bitcoin Core version 0.9.1 which is linked against OpenSSL version 1.0.1g. If you use the official binaries, you can verify the version of OpenSSL being used from the Bitcoin Core GUI's Debug window (accessed from the Help menu). If you compiled Bitcoin Core yourself or use the Ubuntu PPA, update your system's OpenSSL. Linux users should also upgrade their system's version of OpenSSL. Android Android version 4.1.1 is vulnerable to Heartbleed. Try if you can upgrade to at least Android 4.1.2. If you are using Bitcoin Wallet on an Android phone, you should upgrade the app to at least version 3.45. How serious is the risk If you are using the Windows version of the Bitcoin Core GUI without a wallet passphrase, it is possible that your wallet could be compromised by clicking on a bitcoin:. Payment request link If you are using bitcoind (on Linux, OSX, or Windows) , have enabled the-rpcssl option, and allow RPC connections from the Internet, an attacker from a whitelisted (-allowip) IP address can very likely discover the rpcpassword and the last rpc request. It is possible (but unlikely) private keys could be sent to the attacker.
submitted by 51btc to Bitcoin [link] [comments]

Interested in contributing to the BTC community? Here is a exhaustive manual to get you up and running. (Only takes about 20-30 minutes if you are fluent in command prompt on linux).

These instructions will work both on a VPS cloud server or a personal computer. You may find cheap VPS somewhere online for rent.
What Is A Full Node?
A full node is a program that fully validates transactions and blocks. Almost all full nodes also help the network by accepting transactions and blocks from other full nodes, validating those transactions and blocks, and then relaying them to further full nodes.
Most full nodes also serve lightweight clients by allowing them to transmit their transactions to the network and by notifying them when a transaction affects their wallet. If not enough nodes perform this function, clients won’t be able to connect through the peer-to-peer network—they’ll have to use centralized services instead.
Many people and organizations volunteer to run full nodes using spare computing and bandwidth resources—but more volunteers are needed to allow Bitcoin to continue to grow. This document describes how you can help and what helping will cost you.
Costs And Warnings
Running a Bitcoin full node comes with certain costs and can expose you to certain risks. This section will explain those costs and risks so you can decide whether you’re able to help the network.
Special Cases
Miners, businesses, and privacy-conscious users rely on particular behavior from the full nodes they use, so they will often run their own full nodes and take special safety precautions. This document does not cover those precautions—it only describes running a full node to help support the Bitcoin network in general.
Please consult an expert if you need help setting up your full node correctly to handle high-value and privacy-sensitive tasks.
Secure Your Wallet
It’s possible and safe to run a full node to support the network and use its wallet to store your bitcoins, but you must take the same precautions you would when using any Bitcoin wallet. Please see the securing your wallet page for more information.
Minimum Requirements
Bitcoin Core full nodes have certain requirements. If you try running a node on weak hardware, it may work—but you’ll likely spend more time dealing with issues. If you can meet the following requirements, you’ll have an easy-to-use node.
Note: many operating systems today (Windows, Mac, and Linux) enter a low-power mode after the screensaver activates, slowing or halting network traffic. This is often the default setting on laptops and on all Mac OS X laptops and desktops. Check your screensaver settings and disable automatic “sleep” or “suspend” options to ensure you support the network whenever your computer is running.
Possible Problems
Legal: Bitcoin use is prohibited or restricted in some areas.
Bandwidth limits: Some Internet plans will charge an additional amount for any excess upload bandwidth used that isn’t included in the plan. Worse, some providers may terminate your connection without warning because of overuse. We advise that you check whether your Internet connection is subjected to such limitations and monitor your bandwidth use so that you can stop Bitcoin Core before you reach your upload limit.
Anti-virus: Several people have placed parts of known computer viruses in the Bitcoin block chain. This block chain data can’t infect your computer, but some anti-virus programs quarantine the data anyway, making it more difficult to run a full node. This problem mostly affects computers running Windows.
Attack target: People who want to disrupt the Bitcoin network may attack full nodes in ways that will affect other things you do with your computer, such as an attack that limits your available download bandwidth or an attack that prevents you from using your full node’s wallet for sending transactions.
Linux Instructions
The following instructions describe installing Bitcoin Core on Linux systems.
Ubuntu 14.10 Instructions for Bitcoin Core 0.10.0.
If you use Ubuntu Desktop, click the Ubuntu swirl icon to start the Dash and type “term” into the input box. Choose any one of the terminals listed:
Alternatively, access a console or terminal emulator using another method, such as SSH on Ubuntu Server or a terminal launcher in an alternative desktop environment.
Type the following line to add the Bitcoin Personal Package Archive (PPA) to your system:
sudo apt-add-repository ppa:bitcoin/bitcoin
You will be prompted for your user password. Provide it to continue. Afterwards, the following text will be displayed:
Stable Channel of bitcoin-qt and bitcoind for Ubuntu, and their dependencies
More info: https://launchpad.net/~bitcoin/+archive/ubuntu/bitcoin
Press [ENTER] to continue or ctrl-c to cancel adding it
Press enter to continue. The following text (with some variations) will be displayed and you will be returned to the command line prompt:
gpg: keyring /tmp/tmpixuqu73x/secring.gpg' created gpg: keyring/tmp/tmpixuqu73x/pubring.gpg' created gpg: requesting key 8842CE5E from hkp server > > > >keyserver.ubuntu.com gpg: /tmp/tmpixuqu73x/trustdb.gpg: trustdb created gpg: key 8842CE5E: public key "Launchpad PPA for Bitcoin" imported gpg: no ultimately trusted keys found gpg: Total number processed: 1 pg: imported: 1 (RSA: 1) OK
Type the following line to get the most recent list of packages:
sudo apt-get update
A large number of lines will be displayed as different update files are downloaded. This step may take several minutes on a slow Internet connection.
To continue, choose one of the following options
sudo apt-get install bitcoin-qt
sudo apt-get install bitcoind
sudo apt-get install bitcoin-qt bitcoind
After choosing what packages to install, you will be asked whether you want to proceed. Press enter to continue.
If you’re logged in as an administrative user with sudo access, you may log out. The steps in this section should be performed as the user you want to run Bitcoin Core. (If you’re an expert administrator, you can make this a locked account used only by Bitcoin Core.)
Before using the Bitcoin Core daemon, bitcoind, you need to create its configuration file with a user name and password. First create the .bitcoin directory, create (touch) the file, and set the file’s permissions so that only your user account can read it. From the terminal, type:
mkdir ~/.bitcoin touch ~/.bitcoin/bitcoin.conf chmod 600 ~/.bitcoin/bitcoin.conf
Then you can run the command bitcoind. It will print output similar to this:
bitcoind Error: To use the "-server" option, you must set a rpcpassword in the configuration file: /home/bitcoinorg/.bitcoin/bitcoin.conf It is recommended you use the following random password: rpcuser=bitcoinrpc rpcpassword=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX (you do not need to remember this password)
The username and password MUST NOT be the same.
If the file does not exist, create it with owner-readable-only file permissions. It is also recommended to set alertnotify so you are notified of problems; for example: alertnotify=echo %s | mail -s "Bitcoin Alert" [email protected] The “rpcpassword” displayed will be unique for your system. You can copy the rpcuser and rpcpassword lines into your configuration file using the following commands. Note that in most Ubuntu terminals, you need to press Ctrl-Shift-C to copy and Ctrl-Shift-V to paste because Ctrl-C and Ctrl-V have different meanings in a Unix-style terminal.
echo rpcuser=bitcoinrpc >> ~/.bitcoin/bitcoin.conf echo rpcpassword=XXXXXX >> ~/.bitcoin/bitcoin.conf (Warning: Don’t use XXXXXX as your RPC password. Copy the rpcpassword displayed by bitcoind for your system.)
Now you can start Bitcoin Core daemon for real. Type the following command:
bitcoind -daemon
It will print a message that Bitcoin Core is starting. To interact with Bitcoin Core daemon, you will use the command bitcoin-cli (Bitcoin command line interface). Note: it may take up to several minutes for Bitcoin Core to start, during which it will display the following message whenever you use bitcoin-cli:
error: {"code":-28,"message":"Verifying blocks..."}
After it starts, you may find the following commands useful for basic interaction with your node:
to safely stop your node, run the following command:
bitcoin-cli stop
A complete list of commands is available in the Bitcoin.org developer reference.
When Bitcoin Core daemon first starts, it will begin to download the block chain. This step will take at least several hours, and it may take a day or more on a slow Internet connection or with a slow computer. During the download, Bitcoin Core will use a significant part of your connection bandwidth. You can stop Bitcoin Core at any time using the stop command; it will resume from the point where it stopped the next time you start it.
Optional: Start Your Node At Boot
Starting your node automatically each time your computer boots makes it easy for you to contribute to the network. The easiest way to do this is to start Bitcoin Core daemon from your crontab. To edit your crontab, run the following command:
crontab -e
@reboot bitcoind -daemon Save the file and exit; the updated crontab file will be installed for you. Now Bitcoin Core daemon will be automatically started each time your reboot your computer.
If you’re an Ubuntu expert and want to use an init script instead, see this Upstart script.
You have now completed installing Bitcoin Core. If you have any questions, please ask in one of Bitcoin’s many communities, such as Bitcoin StackExchange, BitcoinTalk technical support, or the #bitcoin IRC chatroom on Freenode.
To support the Bitcoin network, you also need to allow incoming connections. Please read the Network Configuration section for details.
Network Configuration
If you want to support the Bitcoin network, you must allow inbound connections.
When Bitcoin Core starts, it establishes 8 outbound connections to other full nodes so it can download the latest blocks and transactions. If you just want to use your full node as a wallet, you don’t need more than these 8 connections—but if you want to support lightweight clients and other full nodes on the network, you must allow inbound connections.
Servers connected directly to the Internet usually don’t require any special configuration. You can use the testing instructions below to confirm your server-based node accepts inbound connections.
Home connections are usually filtered by a router or modem. Bitcoin Core will request your router automatically configure itself to allow inbound connections to Bitcoin’s port, port 8333. Unfortunately many routers don’t allow automatic configuration, so you must manually configure your router. You may also need to configure your firewall to allow inbound connections to port 8333. Please see the following subsections for details.
Testing Connections
The BitNodes project provides an online tool to let you test whether your node accepts inbound connections. To use it, start Bitcoin Core (either the GUI or the daemon), wait 10 minutes, and then visit the GetAddr page (https://getaddr.bitnodes.io/). The tool will attempt to guess your IP address—if the address is wrong (or blank), you will need to enter your address manually.
For more instruction and reviews based off BTC please follow my subreddit /BTC_Reviews
all material from this post was found here --> https://bitcoin.org/en/full-node
submitted by Mattjhagen to rBitcoin [link] [comments]

Basic Linux Commands (Ubuntu Server) Learning Bitcoin 4 - Bitcoin Command Line Helper - Part 1 How to install Bitcoin on Ubuntu 16.04 Ubuntu 20 04 installation and Basics commands [Streamed] - Compiling a Bitcoin Wallet for Windows

Bitcoin software has both a graphical interface called bitcoin-qt and a console interface, bitcoind. If the first is convenient for human use, then without a text it is quite difficult to make an online store or any other service that accepts bitcoins as a payment. About it and speech will go. Next, update Ubuntu’s software package lists: $ sudo apt-get update Finally, install Bitcoin core itself. Enter “Y” when asked asked for permission to continue: $ sudo apt-get install bitcoin-qt This last command may take some time, during which both Bitcoin Core and all of its dependencies will be installed. Run Bitcoin Core The Bitcoin Core daemon (bitcoind) is not included in the .dmg file you may have downloaded to install Bitcoin-QT. Bitcoind, along with its support binaries, is instead included in the OS X .tar.gz file listed on the official Bitcoin Core download page. Stop bitcoin server. N submitblock <hex data> [optional-params-obj] Attempts to submit new block to network. N validateaddress <bitcoinaddress> Return information about <bitcoinaddress>. N verifymessage <bitcoinaddress> <signature> <message> Verify a signed message. N walletlock: Removes the wallet encryption key from memory, locking the wallet. There are two variations of the original bitcoin program available; one with a graphical user interface (usually referred to as just “Bitcoin”), and a 'headless' version (called bitcoind).They are completely compatible with each other, and take the same command-line arguments, read the same configuration file, and read and write the same data files.

[index] [6196] [20486] [1964] [11867] [21113] [18932] [13868] [17343] [1921] [17451]

Basic Linux Commands (Ubuntu Server)

Basic Linux Commands (Ubuntu Server) tt2468. Loading... Unsubscribe from tt2468? ... Install and Setup Ubuntu Server 18.04 LTS - Duration: 14:17. Tech Guides 27,444 views. #ubuntu##installation##commands#20.04#Ubuntu 20.04 installation and basics commands list of commands 1. date,cal-----date and time and calender 2.pwd .....print working directory 3.mkdir ... Ubuntu -2 Setting up .bitcoin folder Commands, cd ~/ mkdir .bitcoin cd .bitcoin nano bitcoin.conf server=1 daemon=1 testnet=0 rpcuser=UNIQUE_RPC_USERNAME rpcpassword=UNIQUE_RPC_PASSWORD. Learning Bitcoin 4 - Bitcoin Command Line Helper - Part 1. Skip navigation ... How to run Bitcoin-qt as a server with a configuration file ... JSON RPC Calls with Bitcoin qt (4 of 6) - Duration: ... Today we are going to compile the latest Bitcoin wallet for Windows Windows 10 has an Ubuntu 16.04 Terminal app in the Microsoft Store that we use to comp...

Flag Counter